User manual MAKITA GA6021C

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA GA6021C. We hope that this MAKITA GA6021C user guide will be useful to you.


MAKITA GA6021C : Download the complete user guide (1011 Ko)

You may also download the following manuals related to this product:

   MAKITA GA6021C (1336 ko)
   MAKITA GA6021C (1336 ko)
   MAKITA GA6021C (1336 ko)
   MAKITA GA6021C (1336 ko)
   MAKITA GA6021C (1424 ko)
   MAKITA GA6021C (1424 ko)
   MAKITA GA6021C (1424 ko)
   MAKITA GA6021C (1424 ko)
   MAKITA GA6021C (1424 ko)
   MAKITA GA6021C (1424 ko)
   MAKITA GA6021C (1424 ko)
   MAKITA GA6021C ANNEXE 43 (1356 ko)
   MAKITA GA6021C ANNEXE 676 (1356 ko)
   MAKITA GA6021C ANNEXE 740 (1356 ko)
   MAKITA GA6021C ANNEXE 168 (1356 ko)
   MAKITA GA6021C ANNEXE 792 (1356 ko)
   MAKITA GA6021C ANNEXE 160 (1424 ko)
   MAKITA GA6021C ANNEXE 759 (1356 ko)
   MAKITA GA6021C ANNEXE 533 (1356 ko)
   MAKITA GA6021C ANNEXE 989 (1356 ko)
   MAKITA GA6021C ANNEXE 432 (1356 ko)
   MAKITA GA6021C ANNEXE 459 (1424 ko)

Manual abstract: user guide MAKITA GA6021C

Detailed instructions for use are in the User's Guide.

[. . . ] Model Depressed center wheel diameter Spindle thread No load speed (no) / Rated speed (n) Overall length Net weight Safety class · Note: Specifications may differ from country to country. Due to our continuing programme of research and development, the specifications herein are subject to change without notice. Intended use The tool is intended for grinding, sanding and cutting of metal and stone materials without the use of water. 5 m/s2 Cutting-off or wire brushing may have different vibration emission values. [. . . ] additional Safety Warnings Specific for Abrasive Cutting-Off Operations: a) Do not "jam" the cut-off wheel or apply excessive pressure. overstressing the wheel increases the loading and susceptibility to twisting or binding of the wheel in the cut and the possibility of kickback or wheel breakage. B) Do not position your body in line with and behind the rotating wheel. When the wheel, at the point of operation, is moving away from your body, the possible kickback may propel the spinning wheel and the power tool directly at you. C) When wheel is binding or when interrupting a cut for any reason, switch off the power tool and hold the power tool motionless until the wheel comes to a complete stop. Never attempt to remove the cut-off wheel from the cut while the wheel is in motion otherwise kickback may occur. Investigate and take corrective action to eliminate the cause of wheel binding d) Do not restart the cutting operation in the workpiece. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece. E) Support panels or any oversized workpiece to minimize the risk of wheel pinching and kickback. Supports must be placed under the workpiece near the line of cut and near the edge of the workpiece on both sides of the wheel. F) Use extra caution when making a "pocket cut" into existing walls or other blind areas. The protruding wheel may cut gas or water pipes, electrical wiring or objects that can cause kickback. Safety Warnings Specific for Sanding Operations: a) Do not use excessively oversized sanding disc paper. Larger sanding paper extending beyond the sanding pad presents a laceration hazard and may cause snagging, tearing of the disc or kickback. Safety Warnings Specific for Wire Brushing Operations: a) Be aware that wire bristles are thrown by the brush even during ordinary operation. B) If the use of a guard is recommended for wire brushing, do not allow interference of the wire wheel or brush with the guard. Wire wheel or brush may expand in diameter due to work load and centrifugal forces. When using depressed centre grinding wheels, be sure to use only fiberglass-reinforced wheels. Be careful not to damage the spindle, the flange (especially the installing surface) or the lock nut. CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Press the shaft lock to prevent spindle rotation when installing or removing accessories. CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. [. . . ] Once the edge of the wheel has been rounded off by use, the wheel may be worked in both A and B direction. WARNING: Always use supplied guard when depressed center grinding wheel/Multi-disc is on tool. Wheel can shatter during use and guard helps to reduce chances of personal injury. Fit the wheel/disc on the inner flange and screw the lock nut onto the spindle. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA GA6021C




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA GA6021C will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.