User manual MAKITA GA5020Y

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA GA5020Y. We hope that this MAKITA GA5020Y user guide will be useful to you.


MAKITA GA5020Y : Download the complete user guide (1334 Ko)

You may also download the following manuals related to this product:

   MAKITA GA5020Y (1336 ko)
   MAKITA GA5020Y (1336 ko)
   MAKITA GA5020Y (1336 ko)
   MAKITA GA5020Y (1336 ko)
   MAKITA GA5020Y (1336 ko)
   MAKITA GA5020Y (1336 ko)
   MAKITA GA5020Y (1336 ko)
   MAKITA GA5020Y (1336 ko)
   MAKITA GA5020Y (1336 ko)
   MAKITA GA5020Y (1336 ko)
   MAKITA GA5020Y (1336 ko)
   MAKITA GA5020Y (1336 ko)
   MAKITA GA5020Y PARTS (598 ko)
   MAKITA GA5020Y PARTS LIST 05-2009 (598 ko)

Manual abstract: user guide MAKITA GA5020Y

Detailed instructions for use are in the User's Guide.

[. . . ] Model Wheel diameter Spindle thread No load speed (RPM) Overall length Net weight 11, 000/min 356 mm (14") 2. Due to our continuing programme of research and development, the specifications herein are subject to change without notice. â· Note: Specifications may differ from country to country. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. [. . . ] CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Press the shaft lock to prevent spindle rotation when installing or removing accessories. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. If the tool consistently fails to quickly stop wheel after switch trigger release, have tool serviced at a Makita service center. For tool without lock button and lock-off button To start the tool, simply pull the switch trigger. For tool with lock-off button To prevent the switch trigger from being accidentally pulled, a lock-off button is provided. Possible to get fine finish, because the rotating speed is kept constantly even under the loaded condition. Additionally, when the load on the tool exceeds admissible levels, power to the motor is reduced to protect the motor from overheating. When the load returns to admissible levels, the tool will operate as normal. For tool with the lock-on switch To start the tool, simply pull the switch trigger (A). For continuous operation, pull the switch trigger (A) and then push in the lock lever (B). To stop the tool from the locked position, pull the switch trigger (A) fully, then release it. For tool with the lock-off switch To prevent the switch trigger from accidentally pulled, a lock lever is provided. To start the tool, push in the lock lever (B) and then pull the switch trigger (A). For tool with the lock on and lock-off switch To prevent the switch trigger from accidentally pulled, a lock lever is provided. To start the tool, push in the lock lever (B) and then pull the switch trigger (A). For continuous operation, push in the lock lever (B), pull the switch trigger and then push the lock lever further in (B). To stop the tool from the locked position, pull the switch trigger (A) fully, then release it. If the indication lamp does not light up, the mains cord or the controller may be defective. The indication lamp is lit but the tool does not start even if the tool is switched on, the carbon brushes may be worn out, or the controller, the motor or the ON/OFF switch may be defective. Unintentional restart proof Even locking lever keeping the switch trigger depressed (Lock-on position) does not allow the tool to restart even when the tool is plugged. [. . . ] Take out the worn carbon brushes, insert the new ones and secure the brush holder caps. CAUTION: Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. Regularly clean the tool's air vents or whenever the vents start to become obstructed. After replacing brushes, plug in the tool and break in brushes by running tool with no load for about 10 minutes. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA GA5020Y




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA GA5020Y will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.