User manual MAKITA DES300

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA DES300. We hope that this MAKITA DES300 user guide will be useful to you.


MAKITA DES300 : Download the complete user guide (3068 Ko)

You may also download the following manuals related to this product:

   MAKITA DES300 (2346 ko)
   MAKITA DES300 (2346 ko)

Manual abstract: user guide MAKITA DES300

Detailed instructions for use are in the User's Guide.

[. . . ] Instruction Manual Instructions d’emploi Gebruiksaanwijzing (page 2-18) (page 19-35) (bladzijde 36-52) DES 300 DES 350 DES 400 DES 380 Important: Read this instruction manual carefully before putting the chain saw into operation and strictly observe the safety regulations!1 Thank you for your trust in our product We congratulate you on your new MAKITA electric chain saw. MAKITA electric chain saws are characterized by their robust, high-efficiency motors and high chain velocities which allow an excellent cutting efficiency. They are equipped with numerous state-of-the-art safety devices, are light, handy and can be put into operation immediately wherever electric power is provided. [. . . ] Perform only the maintenance and repair works described in the instruction manual. Applying spare parts which are not original MAKITA parts or accesories and bar/chain combinations or lengths results in a high risk of accidents. For accidents and damage resulting from using sawing devices or accesories which have not been approved we cannot accept any responsibility. For the event of a possible accident, please, make sure that a first aid box is always immediately available close by. NOTE Individuals with poor circulation who are exposed to excessive vibration may experience injury to blood vessels or the nervous system. Vibration may cause the following symptoms to occur in the fingers, hands or wrists: ”Falling asleep” (numbness), tingling, pain, stabbing sensation, alteration of skin colour or of the skin. 8 - - 20 - Maintenance - - 21 - 22 First aid SERVICE 23 24 Technical data Power consumption Nominal voltage Mains frequency Nominal current Fuse, electric circuit Cable length Chain type Chain pitch Length of a cut Chain velocity Sound power level LWA av per ISO 9207 1) DES 300 Watt V Hz A A cm inch cm m/s dB (A) 1400 DES 350 1600 230…240 ~ 50 DES 400 1600 DES 380 1800 6. 400 mm 22045 Hamburg Germany 8 Year of manufacture Serial number 205 100 631 Typ 205 Identification plate Indicate when ordering spare parts. 18 17 11 12 16 13 14 15 9 PUTTING INTO OPERATION Mounting the guide bar and saw chain Use the universal wrench delivered with the machine. CAUTION: When working on the guide bar or saw chain always wear protective gloves and pull out the power supply plug. CAUTION: Switch on the electric chain saw only after having assembled it completely and inspected!If the hand guard (A/2) can be easily pulled about 2 cm (1") in the direction shown by the arrow, the chain brake has already been released. If this is not the case, pull the hand guard (A/2) firmly in the direction of the arrow until you feel it catch. Take care that the pivot (C/7) of the chain tightener is inserted into the bore (see circle) of the guide bar. Turn the chain adjusting screw (C/6) to the left (counterclockwise) until the pin (C/7) is at the left stop. 8 9 10 8 E Put the saw chain (E/8) onto the sprocket behind the clutch cylinder (E/9) and insert the saw chain into the guide groove of the guide bar. - F Lead the chain (F/8) around the sprocket nose (F/10) of the guide bar. The clutch drum (E/9) should turn with the chain (the sprocket engages the chain). H NOTE: If the chain brake on the dismounted sprocket guard is actuated by accident, it must be released again prior to reassembly: Hold the sprocket guard (H/1) as shown (note direction of arrow) firmly with both hands and press the stop lever (H/ 11) against a hard surface (such as a board) until you hear it catch. 12 I - 1 4 J Replace the sprocket guard (I/1), making sure that the pin on the stop lever fits into the space on the hand guard (circled). - Continue to lift the guide bar end and firmly tighten the fastening nut (I/4) by means of the universal wrench. - NOTE: The arrow (I/12) on the sprocket guard shows the direction of chain travel. [. . . ] Failure to perform the prescribed maintenance work can lead to accidents!The user of the electric chain saw is not allowed to perform maintenance works which are not described in the instruction manual. Page General work Electric chain saw Plastic case Saw chain Guide bar Regularly clean the outside. After a long storage time, have the electric chain saw checked at a service centre (residual oil can become resinic and the valve of the oil pump clogged). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA DES300




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA DES300 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.