User manual MAKITA BTW120

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA BTW120. We hope that this MAKITA BTW120 user guide will be useful to you.


MAKITA BTW120 : Download the complete user guide (457 Ko)

You may also download the following manuals related to this product:

   MAKITA BTW120 (401 ko)
   MAKITA BTW120 (401 ko)
   MAKITA BTW120 (401 ko)
   MAKITA BTW120 (401 ko)
   MAKITA BTW120 ANNEXE 89 (178 ko)
   MAKITA BTW120 ANNEXE 754 (178 ko)

Manual abstract: user guide MAKITA BTW120

Detailed instructions for use are in the User's Guide.

[. . . ] Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. Do not disassemble charger or battery cartridge; take it to a qualified serviceman when service or repair is required. To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. The battery charger is not intended for use by young children or infirm persons without supervision. [. . . ] One red charging light indicates charged condition in 0 ­ 80% and two red ones indicates 80 ­ 100%. With finish of charge, the charging lights will change from two red ones to two green ones. If you leave the battery cartridge in the charger after the charging cycle is complete, the charger will switch into its ``trickle charge (maintenance charge)'' mode which will last approximately 24 hours. Never use it for other purposes or for other manufacturer's batteries. ⷠWhen you charge a new battery cartridge or a battery cartridge which has not been used for a long period of time, it may not accept a full charge. You can recharge the battery cartridge fully after discharging it completely and recharging a couple of times. ⷠIf you charge a battery cartridge from a justoperated tool or battery cartridge which has been left in a location exposed to direct sunlight for a long time, the charging light may flash in red color. charging will begin after the battery cartridge is cooled by the cooling fan installed in the charger. 70°C, two charging lights may flash in red color, and when approx. If the charging light flashes alternately in green and red color, charging is not possible. The terminals on the charger or battery cartridge are clogged with dust or the battery cartridge is worn out or damaged. Conditioning charge can extend the life of battery by automatically searching the optimum charging condition for the batteries in every situation. The battery employed in the following conditions repeatedly, will be worn out shortly, and yellow warning light may flash. Recharge under broken cooling system The charging time of such battery is longer than usual. If you leave the battery cartridge in the charger to prevent spontaneous discharging after full charge, the charger will switch into its ``trickle charge (maintenance charge)'' mode and keep the battery cartridge fresh and fully charged. Always stop tool operation and charge the battery cartridge when you notice less tool power. Let a hot battery cartridge cool down by inserting it into the charger. Charge the Nickel Metal Hydride battery cartridge when you do not use it for more than six months. This charger is equipped with cooling fan for heated battery in order to enable the battery to prove its own performance. Sound of cooling air comes out during cooling, which means no trouble on the charger. ⷠYellow light will flash for warning in the following cases. ­ Trouble on cooling fan ­ Incomplete cool down of battery, such as, being clogged with dust The battery can be charged in spite of the yellow warning light. [. . . ] the fastening torque is affected by a wide variety of factors including the following. CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. To maintain product safety and reliability, repairs, maintenance or adjustment should be carried out by a Makita Authorized Service Center. CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA BTW120




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA BTW120 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.