User manual MAKITA BTW070

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA BTW070. We hope that this MAKITA BTW070 user guide will be useful to you.


MAKITA BTW070 : Download the complete user guide (928 Ko)

Manual abstract: user guide MAKITA BTW070

Detailed instructions for use are in the User's Guide.

[. . . ] It may result in a risk of overheating, possible burns and even an explosion. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. SAVE THESE INSTRUCTIONS — This manual contains important safety and operating instructions for battery charger. Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. [. . . ] With finish of charge, the charging lights will change from two red ones to two green ones. If you leave the battery cartridge in the charger after the charging cycle is complete, the charger will switch into its “trickle charge (maintenance charge)” mode which will last approximately 24 hours. Trickle charge (Maintenance charge) If you leave the battery cartridge in the charger to prevent spontaneous discharging after full charge, the charger will switch into its “trickle charge (maintenance charge)” mode and keep the battery cartridge fresh and fully charged. Charge the battery cartridge with room temperature at 10°C – 40°C (50°F – 104°F). Let a hot battery cartridge cool down by inserting it into the charger. Charge the Nickel Metal Hydride battery cartridge when you do not use it for more than six months. You can recharge the battery cartridge fully after discharging it completely and recharging a couple of times. nOTE: • The battery charger is for charging Makita-battery cartridge. Charging will begin after the battery cartridge is cooled by the cooling fan installed in the charger. 70°C, two charging lights may flash in red color, and when approx. 50°C – 70°C , one charging light in red color. €¢ If the charging light flashes alternately in green and red color, charging is not possible. The terminals on the charger or battery cartridge are clogged with dust or the battery cartridge is worn out or damaged. 5 • Any of the following conditions indicates damage to the charger and/or battery cartridge. 1) The charging light does not flash (green) when the battery charger is plugged into a power source. 2) The charging light does not light up or flash (red) when the battery is inserted in the charger port. 3) Charging is not completed at even more than two hours after red light comes ON at start of charging. 7) The tool stops automatically after the battery capacity reaches under 20% to prevent the lack of fastening torque. Operation The proper fastening torque may differ depending upon the kind or size of the bolt. The relation between fastening torque and fastening time is shown in Fig. [. . . ] MAINTENANCE CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. 10 & 11) Replace carbon brushes when they are worn down to the limit mark. To maintain product safety and reliability, repairs, maintenance or adjustment should be carried out by a Makita Authorized Service Center. 48 GB ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA BTW070




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA BTW070 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.