User manual MAKITA BSR730

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA BSR730. We hope that this MAKITA BSR730 user guide will be useful to you.


MAKITA BSR730 : Download the complete user guide (861 Ko)

You may also download the following manuals related to this product:

   MAKITA BSR730 (942 ko)
   MAKITA BSR730 (942 ko)
   MAKITA BSR730 (942 ko)
   MAKITA BSR730 (942 ko)

Manual abstract: user guide MAKITA BSR730

Detailed instructions for use are in the User's Guide.

[. . . ] Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. Do not operate charger with damaged cord or plug -- replace them immediately. Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. Do not disassemble charger or battery cartridge; take it to a qualified serviceman when service or repair is required. [. . . ] If not, it may accidentally fall out of the tool, causing injury to you or someone around you. If the cartridge does not slide in easily, it is not being inserted correctly. Insert the battery cartridge into charger until it stops adjusting to the guide of charger. Terminal cover of charger can be opened with inserting and closed with pulling out the battery cartridge. When the battery cartridge is inserted, the charging light color will change from green to red and charging will begin. The charging light will keep lighting up lit steadily during charging. One red charging light indicates charged condition in 0 ­ 80% and two red ones indicates 80 ­ 100%. With finish of charge, the charging lights will change from two red ones to two green ones. If you leave the battery cartridge in the charger after the charging cycle is complete, the charger will switch into its ``trickle charge (maintenance charge)'' mode which will last approximately 24 hours. This charger is equipped with cooling fan for heated battery in order to enable the battery to prove its own performance. Sound of cooling air comes out during cooling, which means no trouble on the charger. ­ Trouble on cooling fan ­ Incomplete cool down of battery, such as, being clogged with dust The battery can be charged in spite of the yellow warning light. Check the sound of cooling fan, vent on the charger and battery, which can be sometime clogged with dust. The cooling system is in order although no sound of cooling fan comes out, if the yellow warning light will not flash. The products should be sent to repair or maintenance, if the yellow warning light will frequently flash. Conditioning charge can extend the life of battery by automatically searching the optimum charging condition for the batteries in every situation. The battery employed in the following conditions repeatedly, will be worn out shortly, and yellow warning light may flash. Recharge under broken cooling system The charging time of such battery is longer than usual. If you leave the battery cartridge in the charger to prevent spontaneous discharging after full charge, the charger will switch into its ``trickle charge (maintenance charge)'' mode and keep the battery cartridge fresh and fully charged. Always stop tool operation and charge the battery cartridge when you notice less tool power. Charge the Nickel Metal Hydride battery cartridge when you do not use it for more than six months. Never use it for other purposes or for other manufacturer's batteries. [. . . ] cAUTION: · Always insert the battery cartridge all the way until it locks in place. If you can see the red part on the upper side of the button, it is not locked completely. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA BSR730




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA BSR730 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.