User manual MAKITA BO5041KX1

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA BO5041KX1. We hope that this MAKITA BO5041KX1 user guide will be useful to you.


MAKITA BO5041KX1 : Download the complete user guide (1076 Ko)

Manual abstract: user guide MAKITA BO5041KX1

Detailed instructions for use are in the User's Guide.

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. 1) CAUTION: • Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF” position when released. € Switch can be locked in “ON” position for ease of operator comfort during extended use. apply caution when locking tool in “ON” position and maintain firm grasp on tool. [. . . ] OPERATION CAUTION: • Always use the front grip and firmly hold the tool by front grip and switch handle during operations. 4) The front grip can be loosened and moved horizontally to a desired working position. Once the front grip is in the desired position, retighten before using. 5) Open the grip base, and attach it to the sander in the area of the Makita logo. 6) After closing the grip base, firmly tighten on the front grip to the screw section of the grip base. 7) To remove, loosen and remove front grip, and then remove grip base. Excessive pressure may decrease the sanding efficiency, damage the abrasive disc or shorten tool life. € Using the tool with the pad edge contacting the workpiece may damage the pad. Keep the pad flush with the workpiece and apply slight pressure on the tool. CAUTION: • The sanding pad rotates clockwise during the loaded operation, but it may rotate counterclockwise during the no-load operation. 8) To install the abrasive disc, first remove all dirt or foreign matter from the pad. Then peel off the backing paper from the abrasive disc and attach the abrasive disc to the pad. Be careful to align the holes in the abrasive disc with those in the pad. CAUTION: • If you peel off the abrasive disc from the pad, its adhesion will become poor. 9) Install the dust bag on the tool so that the Makita logo on the dust bag will be upright (not upside down). Polishing operation For BO5041 only CAUTION: • Use only a Makita genuine sponge pad, felt pad or wool pad (optional accessories). € Always operate the tool at low speed to prevent work surfaces from heating abnormally. Excessive pressure may decrease the polishing efficiency and cause motor overload, resulting in tool malfunction. NOTE: • First, wax a not conspicuous portion of the work surface to make sure that the tool will not scratch the surface or result in uneven waxing. 10) When the dust bag is about half full, switch off and unplug the tool. [. . . ] ENH101-14 ENG901-1 OPTIONAL ACCESSORIES CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. € Hook-and-loop type abrasive discs (with pre-punched holes) • Hook-and-loop type sponge pad • Paper dust bag holder (For BO5041 only) • Hook-and-loop type felt pad • Hook-and-loop type wool pad • Paper dust bag NOTE: • Some items in the list may be included in the tool package as standard accessories. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA BO5041KX1




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA BO5041KX1 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.