User manual MAKITA BHX2500CA

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA BHX2500CA. We hope that this MAKITA BHX2500CA user guide will be useful to you.


MAKITA BHX2500CA : Download the complete user guide (4560 Ko)

You may also download the following manuals related to this product:

   MAKITA BHX2500CA PARTS LIST (1925 ko)
   MAKITA BHX2500CA ANNEXE 947 PARTS LIST (1686 ko)

Manual abstract: user guide MAKITA BHX2500CA

Detailed instructions for use are in the User's Guide.

[. . . ] English / French / Spanish PETROL BLOWER SOUFFLEUR À ESSENCE SOPLADOR DE GASOLINA Makita CA Statement BHX2500CA Makita non CA Statement BHX2500 INSTRUCTION MANUAL (P2~P19) Important: Read this instruction manual carefully before putting the Blower into operation and strictly observe the safety regulations!MANUEL UTILISATEUR (P20~P37) MANUAL DE INSTRUCCIONES (P38~P55) English Thank you very much for selecting the MAKITA blower. We are pleased to be able to offer you the MAKITA blower which is the result of a long development programme and many years of knowledge and experience. The blower models BHX2500/BHX2500CA combines the advantages of state-of-the-art technology with ergonomic design. [. . . ] Adjustment becomes necessary, please consult your dealership or an authorized service agent. when Checkup of low-speed rotation Set the low-speed rotation to 3500 ( /min). € If it is necessary to change the rotation speed, regulate the adjusting screw, with Phillips screwdriver. € Turn the adjusting screw to the right, and the engine rotation will increase. Turn the adjusting screw to the left, and the engine rotation will drop. € Direct the nozzle end toward the object to be dusted and pull the trigger lever. € The trigger lever can be fixed in an arbitrary position with the cruise control lever. € Operation of the trigger lever with the cruise control lever in the “ON” position may cause failure. € The lower portion of the fuel tank acts as an assist handle, which enables operation with both hands. Dust Collection Operation WARNING • Do not allow kerosene, gasoline, or lighted cigarette to be sucked into the machine. € Do not allow foreign materials, such as large wood chips, metals, glass, pebbles, etc. NOTE If this machine is operated with the protector oriented upwards or the main handle downwards, there may appear white smoke, oil contamination or oil leakage. 13 INSPECTION AND MAINTENANCE DANGER • Before inspection and maintenance, stop the engine and allow it to cool. - If inspection or maintenance is attempted immediately after engine stop or with the plug cap left attached, the operator may suffer burn or an accident due to careless startup. € After inspection and maintenance, be sure to confirm that all parts are assembled. Replacement of engine oil Deteriorated engine oil will shorten the life of the sliding and rotating parts to a great extent. DANGER • In general, the engine main unit and engine oil still remain hot just after the engine is stopped. In replacement of oil, confirm that the engine main unit and engine oil are sufficiently cooled down. In addition just after of the engine stopping because oil does not finish to return in the oil case, becomes cause of the oil inserting too much. € If the oil filled above the limit, it may be contaminated or may catch fire with white smoke. Interval of replacement: Recommended oil: Initially, every 20 operating hours, and subsequently every 50 operating hours SAE10W-30 oil of API Classification SF Class or higher (4-stroke engine oil for automobile) In replacement, perform the following procedure. (4) Please make the machine vertical (under the protector), refill oil to the shelf inside the oil pipe. [. . . ] PARTS COVERED Listed below are the parts covered by the Emission Component Defect Warranty. Some of the parts listed below may require scheduled maintenance and are warranted up to the first scheduled replacement point for that part. 1) Fuel Metering System (i) Carburetor and internal parts (ii) Fuel filter, if applicable (iii) Throttle stopper, if applicable (iv) Choke System, if applicable 2) Air Induction System (i) Air cleaner plate (ii) Air cleaner case (iii) Air cleaner element 3) Ignition System (i) Spark plug (ii) Flywheel Magneto (iii) Ignition Coil 4) Miscellaneous Items Used in Above Systems (i) Fuel hoses, clamps and sealing gaskets 60 OBTAINING WARRANTY SERVICE To obtain warranty service, take your engine to the nearest MAKITA Factory Service Center authorized by MAKITA. The dealer or service center authorized by Makita will perform the necessary repairs or adjustments within a reasonable amount of time and furnish you with a copy of the repair order. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA BHX2500CA




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA BHX2500CA will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.