User manual MAKITA BFT040F

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA BFT040F. We hope that this MAKITA BFT040F user guide will be useful to you.


MAKITA BFT040F : Download the complete user guide (246 Ko)

You may also download the following manuals related to this product:

   MAKITA BFT040F (1137 ko)
   MAKITA BFT040F (1137 ko)
   MAKITA BFT040F (1137 ko)
   MAKITA BFT040F (1137 ko)
   MAKITA BFT040F (1137 ko)
   MAKITA BFT040F (1137 ko)
   MAKITA BFT040F (1137 ko)
   MAKITA BFT040F (1137 ko)
   MAKITA BFT040F (1137 ko)
   MAKITA BFT040F (1137 ko)
   MAKITA BFT040F (1137 ko)
   MAKITA BFT040F (1137 ko)
   MAKITA BFT040F (1137 ko)

Manual abstract: user guide MAKITA BFT040F

Detailed instructions for use are in the User's Guide.

[. . . ] Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons. To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. Do not operate charger with damaged cord or plug -- replace them immediately. [. . . ] A battery short can cause a large current flow, overheating, possible burns and even a breakdown. Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F). Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. Before using battery charger, read all instructions and cautionary markings on the battery charger. Always stop tool operation and charge the battery cartridge when you notice less tool power. Charge the Nickel Metal Hydride battery cartridge when you do not use it for more than six months. Always stop tool operation and charge the battery cartridge when you notice that the warning lamp lightened up. Remove the battery cartridge from the tool when it remains unused for a long time in the future. ⷠWhen you charge a new battery cartridge or a battery cartridge that has not been used for a long time, it may not accept a full charge. The battery cartridge may decrease the tool performance, because the chemical substance of the battery cartridge is inactive. CAUTION: Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. ⷠUse the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. ⷠWhen not operating the tool, always set the reversing switch lever to the neutral position. this tool has a reversing switch to change the direction of rotation. Depress the reversing switch lever from the A side for clockwise rotation or from the B side for counterclockwise rotation. When the reversing switch lever is in the neutral position, the switch trigger cannot be pulled. Then, as charging proceeds, the other lamps light, one after the other, to indicate the battery capacity. When using When the tool is switched on, the lamps will light after 2 seconds to indicate the remaining battery capacity. If the battery has not been used for a long time, or is needed refresh charging, the orange lamp begins to flicker. CAUTION: A battery cartridge extracted from the charger that has been unplugged with the battery cartridge inserted does not indicate the battery capacity due to its protective function even if the tool is switched on after the battery insertion into the tool. NOTE: Please contact Makita Authorized Service Center if the warning lamp of the battery cartridge does not light up when using or charging. [. . . ] nOTE: · The revolution angle means the angle which a screw/ bolt revolves when the tool attains to 100% from 51% of desired torque. ⷠUse of a low temperature conditioned battery cartridge may sometimes give warning for battery cartridge capacity by warning lamp and beeper which makes the tool stop immediately. In this case, the range of fastening capacity may be inferior to those shown in the above even if a charged battery cartridge is used. CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA BFT040F




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA BFT040F will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.