User manual MAKITA BBO180

[. . . ] It may result in a risk of overheating, possible burns and even an explosion. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. Do not short the battery cartridge: (1) Do not touch the terminals with any conductive material. [. . . ] To install the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. CAUTION: • Always install the battery cartridge fully until the red indicator cannot be seen. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. If the cartridge does not slide in easily, it is not being inserted correctly. ASSEMBLY CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. 4) To install the abrasive disc, first remove all dirt or foreign matter from the pad. Be careful to align the holes in the abrasive disc with those in the pad. 5) Install the dust bag on the tool with its mouth directing downwards. 2) Lithium-ion batteries with a star marking are equipped with a protection system. This system automatically cuts off power to the tool to extend battery life. 12, 13 & 14) CAUTION: • Do not use the tool without the skirt. You can choose one of 12 directions of the skirt in accordance with your purpose. To remove the skirt, remove the screw and remove the skirt with slightly opening it for both sides. To reinstall the skirt, install it with slightly opening it for both sides. CAUTION: • Do not set the skirt other than the designated angle. NOTE: • First, wax a not conspicuous portion of the work surface to make sure that the tool will not scratch the surface or result in uneven waxing. [. . . ] 7 ENG905-1 ENH101-15 Noise The typical A-weighted noise level determined according to EN60745: Model BBO140 Sound pressure level (LpA): 78 dB (A) Uncertainty (K): 3 dB (A) The noise level under working may exceed 80 dB (A). Model BBO180 Sound pressure level (LpA): 77 dB (A) Uncertainty (K): 3 dB (A) The noise level under working may exceed 80 dB (A). Wear ear protection ENG900-1 For European countries only EC Declaration of Conformity We Makita Corporation as the responsible manufacturer declare that the following Makita machine(s): Designation of Machine: Cordless Random Orbit Sander Model No. [. . . ]