User manual MAKITA 9069SF

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA 9069SF. We hope that this MAKITA 9069SF user guide will be useful to you.


MAKITA 9069SF : Download the complete user guide (194 Ko)

You may also download the following manuals related to this product:

   MAKITA 9069SF (2830 ko)
   MAKITA 9069SF (627 ko)
   MAKITA 9069SF (627 ko)
   MAKITA 9069SF (627 ko)
   MAKITA 9069SF (627 ko)
   MAKITA 9069SF (2830 ko)
   MAKITA 9069SF (2830 ko)
   MAKITA 9069SF (2830 ko)
   MAKITA 9069SF (2830 ko)
   MAKITA 9069SF (2830 ko)
   MAKITA 9069SF (2830 ko)
   MAKITA 9069SF (2830 ko)
   MAKITA 9069SF (2830 ko)
   MAKITA 9069SF (2830 ko)
   MAKITA 9069SF ANNEXE 198 (2830 ko)
   MAKITA 9069SF ANNEXE 358 (2830 ko)

Manual abstract: user guide MAKITA 9069SF

Detailed instructions for use are in the User's Guide.

[. . . ] When using depressed center wheels, be sure to use only fiberglass-reinforced wheels. Observe the instructions of the manufacturer for correct mounting and use of wheels. Do not use separate reducing bushings or adaptors to adapt large hole abrasive wheels. [. . . ] For Germany, Austria, Italy, Netherlands, Belgium, Spain, Portugal, Denmark, Sweden, Norway, Finland, Greece and South Africa To prevent the trigger from being accidentally actuated, a lock lever is provided. For continuous operation, push the lock lever in, pull the trigger and then push the lock lever further in. To stop the tool from the locked position, pull the trigger fully, then release it. For other countries than the above countries To start the tool, simply pull the trigger. For continuous operation, pull the trigger and then push the lock lever. To stop the tool from the locked position, pull the trigger fully, then release it. NOTE: Models 9067S and 9069S begin to run slowly when they are turned on. This soft start feature assures smoother operation and less operator fatigue. Important: Always be sure that the tool is switched off and unplugged before installing or removing the wheel guard. When installing a depressed center wheel or an abrasive cut-off wheel, always use a wheel guard. Mount the wheel guard with the tab on the wheel guard band aligned with the notch on the bearing box. Important: Always be sure that the tool is switched off and unplugged before installing or removing the side grip. The side grip can be installed in any of three positions on the sides of the tool, whichever is convenient and keeps the guard properly positioned. Always hold the tool's switch handle and the side grip firmly with both hands during operation. Press the shaft lock to prevent spindle rotation when installing or removing accessories. CAUTION: After operation, always switch off the tool and wait until the wheel has come to a complete stop before putting the tool down. In general, keep the edge of the wheel or disc at an angle of about 15° ­ 30° to the workpiece surface. During the break-in period with a new wheel, do not work the tool in the B direction or it will cut into the workpiece. [. . . ] These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. If you need any assistance for more details regarding these accessories, ask your local Makita service center. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA 9069SF




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA 9069SF will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.