User manual MAKITA 9059S

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA 9059S. We hope that this MAKITA 9059S user guide will be useful to you.


MAKITA 9059S : Download the complete user guide (165 Ko)

You may also download the following manuals related to this product:

   MAKITA 9059S (287 ko)
   MAKITA 9059S (287 ko)
   MAKITA 9059S (287 ko)
   MAKITA 9059S (287 ko)
   MAKITA 9059S (287 ko)
   MAKITA 9059S (287 ko)
   MAKITA 9059S (287 ko)
   MAKITA 9059S (287 ko)
   MAKITA 9059S (287 ko)
   MAKITA 9059S (287 ko)
   MAKITA 9059S (287 ko)
   MAKITA 9059S (287 ko)
   MAKITA 9059S (287 ko)

Manual abstract: user guide MAKITA 9059S

Detailed instructions for use are in the User's Guide.

[. . . ] Observe the instructions of the manufacturer for correct mounting and use of wheels. Do not use separate reducing bushings or adaptors to adapt large hole abrasive wheels. Do not damage the spindle, the flange (especially the installing surface) or the lock nut. [. . . ] When installing a depressed center wheel or an abrasive cut-off wheel, always use a wheel guard. Mount the wheel guard with the tab on the wheel guard band aligned with the notch on the bearing box. For Germany, Austria, Italy, Netherlands, Belgium, Spain, Portugal, Denmark, Sweden, Norway, Finland and Greece To prevent the trigger from being accidentally actuated, a lock lever is provided. For continuous operation, push the lock lever in, pull the trigger and then push the lock lever further in. To stop the tool from the locked position, pull the trigger fully, then release it. For other countries than the above countries To start the tool, simply pull the trigger. For continuous operation, pull the trigger and then push the lock lever. To stop the tool from the locked position, pull the trigger fully, then release it. NOTE: Models 9047S, 9057S, 9049S, 9059S, 9047SF, 9057SF, 9049SF and 9059SF begin to run slowly when they are turned on. This soft start feature assures smoother operation and less operator fatigue. The side grip can be installed in any of three positions on the sides of the tool, whichever is convenient and keeps the guard properly positioned. Always hold the tool's switch handle and the side grip firmly with both hands during operation. Important: Always be sure that the tool is switched off and unplugged before installing or removing the wheel. Fit the wheel on over the inner flange and screw the lock nut onto the spindle. To tighten the lock nut, press the shaft lock firmly so that the spindle cannot revolve, then use the lock nut wrench and securely tighten clockwise. NOTE: Super flange Models 9047F, 9057F, 9049F, 9059F, 9047SF, 9057SF, 9049SF and 9059SF are standard-equipped with a super flange. Only 1/3 of efforts needed to undo lock nut, compared with conventional type. In general, keep the edge of the wheel or disc at an angle of about 15° ­ 30° to the workpiece surface. [. . . ] To maintain product safety and reliability, repairs, maintenance or adjustment should be carried out by a Makita Authorized Service Center. CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA 9059S




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA 9059S will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.