User manual MAKITA 6337DWDLE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA 6337DWDLE. We hope that this MAKITA 6337DWDLE user guide will be useful to you.
Manual abstract: user guide MAKITA 6337DWDLE
Detailed instructions for use are in the User's Guide.
[. . . ] Cordless Driver Drill
Equipped with Electric Brake MODEL 6217D MODEL 6237D MODEL 6317D MODEL 6337D MODEL 6347D
INSTRUCTION
MANUAL
WARNING: For your personal safety, READ and UNDERSTAND before using. c o m
SPECIFICATIONS
Model Steel Wood Capacities Wood screw Machine screw No load speed (RPM) High Low 6217D 6237D 6317D 6337D 13 mm (1/2") 25. 4 mm (1") 6 x 75 mm (1/4" x 3") 13 mm (1/2") 32 mm (1-1/4") 6 x 75 mm (1/4" x 3") 13 mm (1/2") 38 mm (1-1/2") 10 x 89 mm (3/8" x 3-1/2") 13 mm (1/2") 6347D 10 mm (3/8") 25. 4 mm (1") 6 x 75 mm (1/4" x 3") 13 mm (1/2") 32 mm (1-1/4") 6 x 75 mm (1/4" x 3") 13 mm (1/2")
0 - 1, 300/min. 243 mm (9-9/16") 2. 4 kg (5. 3 lbs) Charging time 45 min.
Overall length Net weight Battery Cartridge 1222 1233 1234 1235 1422 1433 1434 1435 1822 1833 1834 1835 18 V 14. 4 V 12 V
Voltage
Battery Charger
50 min. 70 min.
· Manufacturer reserves the right to change specifications without notice. [. . . ] Insert the cartridge fully into the port so that it rests on the charger port floor. When the battery cartridge is inserted, the charging light color will change from green to red and charging will begin. Charge the battery cartridge with room temperature at 10°C - 40°C (50°F - 104°F). Charge the Nickel Metal Hydride battery cartridge when you do not use it for more than six months.
9
001894
Switch action
· CAUTION: Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released.
1
1. Release the switch trigger to stop.
Electric brake
This tool is equipped with an electric brake. If the tool consistently fails to quickly stop after switch trigger release, have tool serviced at a Makita service center.
001895
Reversing switch action
This tool has a reversing switch to change the direction of rotation. Depress the reversing switch lever from the A side for clockwise rotation or from the B side for counterclockwise rotation.
1
2 1. Counterclockwise
3
When the reversing switch lever is in the neutral position, the switch trigger cannot be pulled. Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. When not operating the tool, always set the reversing switch lever to the neutral position.
· ·
·
001896
Speed change
To change the speed, first switch off the tool and then slide the speed change lever to the "2" side for high speed or "1" side for low speed. Be sure that the speed change lever is set to the correct position before operation. CAUTION: Always set the speed change lever fully to the correct position. If you operate the tool with the speed change lever positioned halfway between the "1" side and "2" side, the tool may be damaged.
1
1. Speed change lever
·
10
·
Do not use the speed change lever while the tool is running. The tool may be damaged.
001897
Selecting action mode
This tool has an action mode change lever. For drilling, depress the lock button and then slide the action mode change lever to the left ( symbol). For screwing, slide the action mode change lever to the right ( symbol) until it is locked. If it is hard to turn the lever, first turn the chuck slightly in either direction and then turn the lever again. CAUTION: Always slide the action mode change lever all the way to your desired mode position. If you operate the tool with the lever positioned halfway between the mode symbols, the tool may be damaged. Action mode change lever
·
·
001898
Adjusting the fastening torque
The fastening torque can be adjusted in 16 steps by turning the adjusting ring so that its graduations are aligned with the pointer on the tool body. [. . . ] Columbus, OH 43213 (614) 860-0222 6379 Pearl Road Parma Heights, OH 44130 (440) 843-7555 1617 E. Prospect, IL 60056-6011 (847) 297-3100
MISSOURI 9876 Watson Road St. 101 Salt Lake City, UT 84115 (801) 359-3410
INDIANA 8403 Michigan Road, Unit 1 Indianapolis, IN 46268 (317) 334-9980
NEBRASKA 4129 S. Memorial Road Oklahoma City, OK 73114 (405) 752-2655
WASHINGTON 22220 84th Ave. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA 6337DWDLE
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA 6337DWDLE will begin.