User manual MAKITA 6227DWE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA 6227DWE. We hope that this MAKITA 6227DWE user guide will be useful to you.


MAKITA 6227DWE : Download the complete user guide (421 Ko)

You may also download the following manuals related to this product:

   MAKITA 6227DWE PARTS LIST (119 ko)

Manual abstract: user guide MAKITA 6227DWE

Detailed instructions for use are in the User's Guide.

[. . . ] Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F). Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. [. . . ] Always insert it all the way until it locks in place with a little click. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. If the cartridge does not slide in easily, it is not being inserted correctly. Be sure that the speed change lever is set to the correct position before operation. CAUTION: • Always set the speed change lever fully to the correct position. 6) The fastening torque can be adjusted in 17 steps by turning the adjusting ring so that its graduations are aligned with the pointer on the tool body. The fastening torque is minimum when the number 1 is aligned with the pointer, and maximum when the A marking is aligned with the pointer. The clutch will slip at various torque levels when set at the number 1 to 16. Before actual operation, drive a trial screw into your material or a piece of duplicate material to determine which torque level is required for a particular application. NOTE: Do not operate the tool with the adjusting ring set between the number 16 and the A marking. 2) Important: Always be sure that the tool is switched off and the battery cartridge is removed before installing or removing the bit. 7) Place the point of the driver bit in the screw head and apply pressure to the tool. [. . . ] If you need any assistance for more details regarding these accessories, ask your local Makita service center. € Drilling in wood When drilling in wood, best results are obtained with wood drills equipped with a guide screw. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA 6227DWE




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA 6227DWE will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.