User manual MAKITA 4334D

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA 4334D. We hope that this MAKITA 4334D user guide will be useful to you.


MAKITA 4334D : Download the complete user guide (290 Ko)

You may also download the following manuals related to this product:

   MAKITA 4334D (779 ko)
   MAKITA 4334D (779 ko)
   MAKITA 4334D (542 ko)
   MAKITA 4334D (542 ko)
   MAKITA 4334D (542 ko)
   MAKITA 4334D (542 ko)
   MAKITA 4334D (542 ko)
   MAKITA 4334D (542 ko)
   MAKITA 4334D (542 ko)
   MAKITA 4334D (542 ko)
   MAKITA 4334D (542 ko)
   MAKITA 4334D (750 ko)
   MAKITA 4334D (750 ko)
   MAKITA 4334D (750 ko)
   MAKITA 4334D (750 ko)
   MAKITA 4334D ANNEXE 367 (542 ko)
   MAKITA 4334D ANNEXE 238 (542 ko)
   MAKITA 4334D ANNEXE 972 (356 ko)
   MAKITA 4334D (779 ko)
   MAKITA 4334DWA 4072D (294 ko)
   MAKITA 4334D 4072D (294 ko)
   MAKITA 4334D ANNEXE 349 (542 ko)
   MAKITA 4334D ANNEXE 536 (356 ko)

Manual abstract: user guide MAKITA 4334D

Detailed instructions for use are in the User's Guide.

[. . . ] ENGLISH Cordless Jig Saw MODEL 4334D 002701 INSTRUCTION MANUAL WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. SPECIFICATIONS Model Length of stroke Wood Max. cutting capacities Mild steel Aluminum Strokes per minute (min ) Overall length Net weight Rated voltage -1 4334D 26 mm 135 mm 10 mm 20 mm 500 - 2, 800 281 mm 3. 4 kg D. C. 18 V · Due to our continuing programme of research and development, the specifications herein are subject to change without notice. [. . . ] 7. ENC004-1 (1) Do not touch the terminals with any conductive material. (2) Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc. A battery short can cause a large current flow, overheating, possible burns and even a breakdown. Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F). Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. 3. 4. 5. 8. 6. SAVE THESE INSTRUCTIONS Tips for maintaining maximum battery life 1. Always stop tool operation and charge the battery cartridge when you notice less tool power. Charge the battery cartridge with room temperature at 10°C - 40°C (50°F - 104°F). Charge the Nickel Metal Hydride battery cartridge when you do not use it for more than six months. 4. 2. 5 FUNCTIONAL DESCRIPTION · CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. 002703 Installing or removing battery cartridge · · · Always switch off the tool before insertion or removal of the battery cartridge. To remove the battery cartridge, withdraw it from the tool while pressing the buttons on both sides of the cartridge. To insert the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Always insert it all the way until it locks in place with a little click. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. The speed adjusting dial can be turned only as far as 5 and back to 1. Do not force it past 5 or 1, or the speed adjusting function may no longer work. ASSEMBLY · CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Installing or removing saw blade CAUTION: Always clean out all chips or foreign matter adhering to the blade and/or blade holder. Failure to do so may cause insufficient tightening of the blade, resulting in a serious personal injury. Do not touch the blade or the workpiece immediately after operation; they may be extremely hot and could burn your skin. Insufficient tightening of the blade may cause blade breakage or serious personal injury. · · · 002719 INSTALLATION 1. Push the blade installing lever in the (1) direction to release it. (1) 1 1. Blade installing lever 7 002720 2. (3) (2) (4) 3. Pull the blade installing lever in the (2) direction until it stops with a little click. If you have difficulty pulling it out, try to do so while moving it back and forth in the (3) direction. Rotate the blade installing lever in the (4) direction until the clamp protrudes 5 - 7 mm from the blade holder. [. . . ] Graduation 002759 Front flush cuts Loosen the base securing lever and slide the base all the way back. Then tighten the base securing lever to secure the base. Cutouts Cutouts can be made with either of two methods A or B. 002765 A) Boring a starting hole For internal cutouts without a lead-in cut from an edge, pre-drill a starting hole 12 mm or more in diameter. Starting hole 002766 B) Plunge cutting You need not bore a starting hole or make a lead-in cut if you carefully do as follows. (1) Tilt the tool up on the front edge of the base with the blade point positioned just above the workpiece surface. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA 4334D




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA 4334D will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.