User manual MAKITA 1923B

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA 1923B. We hope that this MAKITA 1923B user guide will be useful to you.


MAKITA 1923B : Download the complete user guide (505 Ko)

You may also download the following manuals related to this product:

   MAKITA 1923B (514 ko)
   MAKITA 1923B (514 ko)
   MAKITA 1923B (514 ko)
   MAKITA 1923B (514 ko)
   MAKITA 1923B ANNEXE 84 (402 ko)
   MAKITA 1923B ANNEXE 162 (402 ko)
   MAKITA 1923B ANNEXE 498 (402 ko)
   MAKITA 1923B ANNEXE 359 (402 ko)
   MAKITA 1923B ANNEXE 359 (402 ko)
   MAKITA 1923B ANNEXE 959 (402 ko)
   MAKITA 1923B ANNEXE 505 (402 ko)
   MAKITA 1923B ANNEXE 212 (402 ko)
   MAKITA 1923B ANNEXE 641 (402 ko)
   MAKITA 1923B ANNEXE 441 (402 ko)
   MAKITA 1923B ANNEXE 110 (402 ko)
   MAKITA 1923B ANNEXE 759 (173 ko)
   MAKITA 1923B ANNEXE 739 (402 ko)
   MAKITA 1923B ANNEXE 698 (173 ko)

Manual abstract: user guide MAKITA 1923B

Detailed instructions for use are in the User's Guide.

[. . . ] Make sure the blade is not contacting the workpiece before the switch is turned on. Always switch off and wait for the blades to come to a complete stop before any adjusting. When leaving the planer, switch off and set it with the front base up on a wooden block, so that the blades do not contact anything. Always change both blades or covers on the drum, otherwise the resulting imbalance will cause vibration and shorten machine life. [. . . ] To install the blades, loosely attach the adjust plate to the set plate with the pan head screws and set the mini planer blade on the gauge base so that the cutting edge of the blade is perfectly flush with the inside flank of the gauge plate. Set the adjust plate/set plate on the gauge base so that the planer blade locating lugs on the set plate rest in the mini planer blade groove, then press in the heel of the adjust plate flush with the back side of the gauge base and tighten the pan head screws. It is important that the blade sits flush with the inside flank of the gauge plate, the planer blade locating lugs sit in the blade groove and the heel of the adjust plate is flush with the back side of the gauge base. Set the drum cover over the adjust plate/set plate and screw in the three hex flange head bolts so that a gap exists between the drum and the set plate to slide the mini planer blade into position. The blade's lengthwise adjustment will need to be manually positioned so that the blade ends are clear and equidistant from the housing on one side and the metal bracket on the other. Tighten the three hex flange head bolts (with the socket wrench provided) and hand rotate the drum to check clearances between the blade ends and the machine body. cAUTION: Tighten the blade installation bolts carefully when attaching the blades to the machine. Your planing surface will end up rough and uneven, unless the blade is set properly and securely. The blade must be mounted so that the cutting edge is absolutely level, that is, parallel to the surface of the rear base. Although this side view cannot show it, the edges of the blades run perfectly parallel to the rear base surface. Cause: One or both blade edges fails to protrude enough in relation to rear base line. Cause: One or both blade edges protrudes too far in relation to rear base line. Depth of cut may be adjusted by simply turning the knob on the front of the machine. First, rest the machine front base flat upon the workpiece surface without the blades making any contact. Apply pressure on the front of machine at the start of planing, and at the back at the end of planing. Planing will be easier if you incline the workpiece in stationary fashion, so that you can plane somewhat downhill. The power planer keeps cutting at a speed that will not result in jamming by chips. For rough cutting, the depth of cut can be increased, while for a good finish you should reduce the depth of cut and advance the machine more slowly. CAUTION: Before plugging in the machine, always check to see that the switch trigger actuates properly and returns to the ``OFF'' position when released. For continuous operation, pull the trigger and then push in the lock button. [. . . ] To maintain product safety and reliability, repairs, maintenance or adjustment should be carried out by Makita Authorized Service Center. Use of the special nozzle assembly will minimize chip scatter, making for a cleaner work area. The nozzle assembly may be attached after the chip cover on the machine body is removed. When slipping on the assembly, fit the pin on it into the rear cover hole. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA 1923B




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA 1923B will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.