User manual MAGELLAN ROADMATE 3045LM

[. . . ] Magellan® RoadMate® 2036, 2045 and 3045 GPS Receivers User Manual 471 El Camino Real, Santa Clara, CA 95050 IMPORTANT SAFETY WARNINGS The Magellan RoadMate receiver is a vehicle-navigation aid designed to assist you in arriving at your selected destinations. When using the Magellan RoadMate receiver, these safety rules must be followed to prevent accidents that can result in injury or death to yourself or others: · Please check the applicable regulations in your state regarding windshield mounting. The driver should enter data or program the Magellan RoadMate receiver only when the vehicle is stationary. Only a vehicle passenger should enter data or program the Magellan RoadMate receiver while the vehicle is moving. [. . . ] In normal mode, your position is shown on the map along with the time. As you travel, your position will be updated, giving you a clear view of your position and surrounding streets. (A) Current location. OneTouch Menu gives you instant access to your saved search criteria and favorite destinations. In routing mode additional information is displayed providing detailed information about the route you have selected. (A) Turn instructions for next maneuver. While routing it also can also display distance to destination, estimated time of arrival (ETA), and time remaining. Tap on the information field to change. 10 (F) Zoom in and zoom out controls to change the map scale. (H) Access the list of nearest Highway Exit POIs (available only when driving on a highway/freeway/interstate). The OneTouch menu gives you instant access to your bookmarked searches and favorite destinations. Setting the Map Modes (2D or 3D) The map is normally displayed in 3D mode (perspective view) but you can set the map to 2D mode (top down view) if so desired. Tap 2D to switch the map to 2D mode from 3D mode, or tap 3D from 2D mode. to switch the map to 3D mode Setting Zoom Levels Select the zoom level that best suits your needs. As you zoom out in 3D, the display will switch to 2D at higher zoom levels. Tap the '+' or '-' zoom level buttons at the bottom of the display to set the desired zoom level. While viewing the Map screen, slide your finger or a stylus across the map. When finished, tap and the map returns to your current position. Routing to a Panned Position 1. A red push pin will be displayed along with information about the point chosen at the top of the screen. If an active route already exists, first you need to define what to do with this new route point: ·Replace Destination: the next destination is cleared and replaced with the one selected from the Pan screen. ·Go There Now: the selected location is inserted in the route as an intermediate destination before the next destination. ·Add To Trip: the selected destination is added to the end of the current trip. Tap the large GO button on the right to return to the Map screen and begin navigating. Note: if the panned position does not match an existing street address (i. e. the destination is not along a road or street that is stored in the map database), the guidance will stop on the road that is closest to your destination. A dashed line to your final destination will then be displayed on the map. 11 Current Location Screen The Current Location screen displays the approximate address of your current position, the next and previous intersections, your latitude, longitude, heading and elevation. [. . . ] Setting Auto Zoom on Turns You can set the map to automatically zoom in to the lowest level when coming up to a turn. Setting Highway Lane Assist When Highway Lane Assist is checked, the map will display highway signs as you approach a highway interchange giving you visual indication of which lane you want to be in. Checking Highway Lane Assist enables this function. 30 Sound Setting Volume from Settings 1. Unchecking Button Sounds will turn off the audible indication that a button is tapped. Navigation Preferences Setting The Default Route Method 1. [. . . ]