User manual MAGELLAN FX324 MAP COLOR FAQ

[. . . ] You need to set the local time if you are in a time zone other than the UTC time zone. For that press the menu button and use the pos tab select local time and enter the local time with the alphanumeric keypad and push enter. How do I change the l coordinate system in my FX324 Map and FX324 Map Color? 7 Question: Answer: 8 Question: Answer: For that press the menu button and select pos tab select co-ordinates and select the co-ordinate system being displayed. Press the menu button and select pos Tab then select map datum and select 2D and press enter. 9 Question: Answer: 10 Question: Answer: How can I change the elevation units of measurement from meters to feet? [. . . ] Access the route and Track Menu which can be displayed by pressing menu from any screen and selecting the RTE/TRK Tab 2. Repeat this process until you have entered all the waypoints for your route. To save the route use the arrow key to choose the third icon and press enter. 22 Question: Answer: 23 Question: Answer: How many waypoints I can store in a route?Access the route and track menu which can be displayed by pressing menu from any screen and selecting the RTE/TRK tab. Select the fifth option track list and press enter. 24 Question: Answer: 25 Question: Answer: What is Man Overboard (MOB)?The Man Overboard (MOB) function allows you to instantaneously mark a position in an emergency situation (such as a person falling overboard), and guides you back to that position as quickly as possible. The mark function allows you to save special waypoints (marks) or passage points as well as your anchoring position. The MOB and mark functions can be activated with the mark/MOB button on your device (red button). The activation mode for these two functions can be selected in the setup menu. Open the door on the right side of the device by carefully pulling open the lid. If necessary, pull out the card that is already installed by lightly pushing on it until you hear a click and then carefully pull it out of the reader. Insert the new SD Card, with the logo facing you --without forcing it -- and push it in until you hear a click. The GPS got IP67 standard CEI 529. waterproofness standard can be warranted only when the door is properly closed. 26 Question: Answer: 27 Question: Answer: 28 Question: Answer: 29 Question: Answer: 30 Question: Answer: What is a route?When navigating a route, the GPS will automatically change the destination waypoint to the next waypoint on the list as it reaches each waypoint. The GPS receiver or autopilot normally 31 Question: Answer: sounds an alarm, and requires an acknowledgment, before making any course change. Cross track error (XTE) is the distance, left or right, of the desired courseline. The courseline is a straight line from your present position to your destination. No Is the Apple MacIntosh (Mac) computer compatible with FX 324 Map and FX 324 Map Color?No 32 Question: Answer: 33 Question: Answer: 34 Question: Answer: Can I purchase a hard copy of the user manual?No, however you can download the user manual at no charge and print the pages that you need. http://www. magellangps. com/support/product. asp?prodid=175 How do I check the serial number of FX 324 Map and FX 324 Map color?Press the menu button then select on advan tab . Choose version and press enter. [. . . ] Sub-meter accuracy can be obtained by using DGPS and post-processing calculations in static positioning. Where can I install the external antenna if I am using a sailboat or a motorboat?For sailboats, it is recommended that you install the antenna on the stern rail. For motorboats, it is recommended that you put the antenna on the cabin. [. . . ]