User manual MAGELLAN EXPLORIST 200

[. . . ] Magellan eXplorist 200 Reference Manual Topics: · · · · · · · · · · · eXplorist 200 GPS Receiver Using the eXplorist 200 Starting Up Navigation Screens Points of Interest Routes Track Logs Preferences Specifications Accessories Contacting Magellan Support *** Warnings *** IN THE INTEREST OF SAFETY, DO NOT USE THIS NAVIGATION DEVICE WHILE DRIVING A VEHICLE. Please do not try to change any settings on the Magellan® eXploristTM while driving. Taking your eyes off the road is dangerous and can result in an accident in which you or others could be injured. USE GOOD JUDGMENT This product is an excellent navigation aid, but it does not replace the need for careful orienteering and good judgment. Never rely solely on one device for navigating. USE CARE The Global Positioning System (GPS) is operated by the U. S. Government, which is solely responsible for the accuracy and maintenance of the GPS network. [. . . ] Detailed information on these functions can be found later in this manual. Points of Interest Editing a User-Created POI 32 POIs that you have saved can be edited to change the icon, name, elevation and message. You can also change the location, but keep in mind that this effectively is creating a new POI in a new location. NOTE: If the POI you are trying to edit is used in a route, you will be asked to confirm that you want to edit this POI. If the Icon field was selected: Use the Arrow joystick to select the icon desired and press ENTER. To aid in your selection, the type of icon selected is displayed in the information block at the top of the keypad. Mark Icon Name MAGELLAN Location 34°06. 560N 117°49. 566W 924 FT Elevation Message CREATE MESSAGE? 13b. If the Name field was selected: Use the Arrow joystick to Save Cancel select the character desired and press ENTER. To access the Editing an existing POI with the Icon field lower-case characters, highlight Shift and press ENTER. To highlighted clear everything and start over, highlight CLEAR and press ENTER. When you are satisfied with the name, highlight OK and press ENTER. Note: User-entered POI names can be only eight characters long (including spaces). 13c. If the Message field was selected: Use the keypad displayed, just as was described in 13b, to enter a message for this POI. When the Icon, Name and Message fields are ready, use the Arrow joystick to highlight Save. Press ENTER. Points of Interest Deleting a User-Created POI 33 POIs that you have saved can be deleted using this operation. If you have created a lot of POIs, you may wish to delete any unneessary ones so that you may more easily search for a newly created POI. You will need to input the information for a deleted POI if you will want it again. To prevent accidental deletion, a confirmation window will be displayed, confirming the deletion. Use the Arrow joystick to highlight Delete POI. Note: If the POI selected is used in a route, you will be asked to confirm the deletion. Confirm the deletion by highlighting Yes, or cancel the deletion by highlighting No. Press ENTER. Points of Interest Viewing a User-Created POI on the Map Screen 34 POIs that you have saved can be viewed on the Map screen to assist you in locating the POI. You may use the Zoom buttons to change the scale of the map displayed; and if your position icon is within range, it will be shown. Note: Remember that pressing the NAV button will return you to the last viewed Map screen. In step 12 if you are finished with the POIs in the POI database, you could press NAV to close the POI database and return to the last viewed Map screen. Points of Interest Copying a Preloaded POI 35 POIs that have been preloaded as part of the background map can be saved as a user-entered POIs. Preloaded POIs cannot be deleted; it just copies it to the My Points of Interest portion of the database. [. . . ] Press ENTER. Clearing All Track Logs, User-Entered POIs, and Routes 1. The eXplorist will automatically shut off. Preferences Reseting the eXplorist to Factory Defaults 1. Press ENTER. 73 Specifications Performance Receiver Antenna 74 14 parallel-channel technology, tracks up to 14 satellites to compute and update information. Patch Warm Cold Update Rate less than 1 minute less than 2 minutes 1 second continuous <7 meters, 95% 2D RMS w/WAAS/EGNOS <3 meters, 95% 2D RMS Velocity 0. 1 knot RMS steady-state 951 MPH (1530. 5 km/h) 60, 000 ft. [. . . ]