User manual MAGELLAN CROSSOVERGPS

[. . . ] Magellan® CrossoverGPSTM Reference Manual Instructions for Operating the Magellan CrossoverGPS IMPORTANT SAFETY WARNINGS The Magellan CrossoverGPS is a vehicle-navigation aid designed to assist you in arriving at your selected destinations. When using the Magellan CrossoverGPS, these safety rules must be followed to prevent accidents that can result in injury or death to yourself or others: · Some countries prohibit mounting any item to your windscreen. Please check the applicable regulations in your country as regards windscreen mounting. An adhesive disk is supplied with the Magellan CrossoverGPS for use as an alternative mounting solution to the dashboard. [. . . ] Using the instructions found in Creating a Route, add the second destination to the list. Continue adding destinations by pressing on the last listed destination and selecting Add until you have entered all of the desired destinations for your trip. With the trip complete, select Save. Activating a multiple destination trip 1. to go to page 2 of the Menu. Using the Trip Planner 23 5. A list of the individual destinations is displayed. Select the routing method to calculate the trip. You can also pick which destination to begin the trip on, skipping over destinations prior to it, by selecting the first destination you want to go to. In this example, selecting `Kensington Palace' will go to all four destinations in the trip. If you select `Baden Powell House' the trip would be to `Baden Powell House' and then to the `Stranger Hall', skipping `Kensington Palace' and the `Royal College of Music'. 6. Editing a multiple destination trip 1. Select the destination from the list of available destinations that is to be edited. Add: Using the standard methods of selecting a destination, a new destination can be selected and added to the trip after the destination selected in step 5. Move Up: Moves the destination selected up one level in the trip list. Move Down: Moves the destination selected down one level in the trip list. to go to page 2 of the Menu. Using the Trip Planner 24 Deleting a multiple destination trip 1. to go to page 2 of the Menu. Renaming a multiple destination trip 1. to go to page 2 of the Menu. Using the Trip Planner 25 Marine Navigation The Marine application provides a basic form of navigation for marine use. Without loading any external maps (Magellan BlueNav) you can create a track, add waypoints, navigate to a saved waypoint and perform a backtrack (following your track back to your point of origin). If you have loaded any of the Magellan BlueNav charts you will have additional marine navigational information that can enhance your marine trip. Map view without BlueNav map loaded Map view with BlueNav map loaded Magellan BlueNav charts are available from Magellan at http://www. magellangps. com/ products/software. asp. The Magellan CrossoverGPS is compatible with MapSend BlueNav Local Charts and any of the eXplorist MapSend BlueNav XL3 Charts. (Meridian MapSend BlueNav XL3 charts will not work in the Magellan CrossoverGPS. ) Loading MapSend BlueNav Charts 1. Install the SD card with the BlueNav Chart into the SD card slot on the left side of the Magellan CrossoverGPS. If the unit is on or after you turn it on, a message will be displayed indicating that maps have been found on the SD card. (From the Map screen, tap the MENU button. ) NOTE: If you have an active trip or goto you will need to cancel it before being able to select a region from the SD card. Tap the Right Arrow in the bottom right-hand corner to access page 2 of the menu. [. . . ] Select List Files . Use the Navigation key or the Down arrow the photo you wish to view and select View. to highlight While viewing the image, double-clicking on the image (i. e. pressing twice on the screen) will show the image in full screen view. You can then cycle through the images by pressing on the left or right arrow. Previous Image (left arrow) Press the right arrow button to view the previous image in the folder. [. . . ]