User manual MAGELLAN 750 NAV INSTALL

[. . . ] For example, when trying to locate Joe Louis Arena they could just type in any one of the three words. A list will appear showing all POI's that have any combination of the three words. · Page 22 - On the Select Destination Screen the Freeway Entrance/Exit has been replaced with Route to a City. Route to a City feature This feature allows the user to navigate to the center of a city with Detailed Coverage. [. . . ] Database Update The Magellan 750NAV Database has been updated to include more cities, towns, and roads. DCA Format The 10 DCA format has been consolidated to just 2 DCA's, which include Canada in each DCA. (See image on page 4. ) 3 10 DCA Format 2 DCA Format 4 Route Exclude The Route Exclude feature gives the user the ability to exclude roads while in route to a selected destination. This will enable users to bypass traffic jams, construction zones, toll roads and other paths that can make a trip longer than necessary. To exclude a maneuver from the route press the VIEW button while in route guidance mode. A maneuver list will generate. To exclude a maneuver from the route, highlight the maneuver and press ENTER. The system will display the maneuver the user would like to remove, press ENTER to exclude the maneuver. The system will calculate a new route. If it is possible to route around the selected maneuver the 750NAV will display a new route excluding the maneuver. Important note: If the system recalculates the route after using the route exclude feature, the route will revert back to the original route. 5 Off-Road Navigation Great for off-road enthusiasts, the 750NAV'S Off-Road Navigation option allows marking of favorite trails, hunting, and fishing spots. With this option the user can route to points not on roads, set landmarks, create trails, and more. Off-Road is a navigation mode separate from turn by turn navigation and provides the user with the feel of being a separate product. Once Off-Road mode is entered, the unit is functionally transformed into a product, which works just like Magellan's famous hand held GPS receiver. Features Enter navigation points (waypoints) by marking a waypoint by the systems current position, using the systems cursor, or by entering latitude and longitude coordinates. The maximum number of waypoints the system is capable of saving into memory is 100. The 750NAV , guides the user from point to point by visually connecting the waypoints with highlighted lines in the order of the route lists. The navigation system then provides directional instruction to the next waypoint in the route. Waypoint to waypoint navigation continues in this fashion progressively through the list of waypoints making up the route. Once the final waypoint in the list is navigated to, the you have arrived voice prompt is heard followed by 3 double chimes. Also a destination screen will be displayed showing the waypoint name and the Lat/Long coordinates of the waypoint. The maximum number of routes the systems can save into memory is 10 with 25 waypoints max. Reverse Route - Calculate a route from the last waypoint in the list to the first waypoint. Next Waypoint - Navigate to the next waypoint in a route list, allows the user to step through a route list or skip the next waypoint while driving a route. The Clinometer Sensor shows how aggressive the terrain is by showing graphics with pitch and roll readings of the vehicles current position. 6 Option Menu Features To access the Off-Road Option menu features, press the OPTION button. [. . . ] The next waypoint saved will be WAY002 and the numbers will increment after each waypoint is saved. The user may choose to name the waypoint to make it easier to identify the waypoint. To perform this function, highlight the waypoint name and press ENTER. Using the QuickSpell screen, delete the current waypoint name and spell the desired name (6-character max. ). The waypoint icons are a good way to identify characteristics of specific trails (the default waypoint icon is a red flag). To select a new waypoint icon, select the waypoint icon box and press ENTER. Select the desired waypoint icon and press ENTER. The lower box is for providing a description on a specific waypoint. Highlight the description box and press ENTER. 12 Using the QuickSpell Screen input the desired description (35-character max. ) and press ENTER. After making any changes to the waypoint scroll to save and press ENTER. A waypoint may be saved using Lat/Long coordinates. [. . . ]