User manual MACKIE TT24REMOTE

[. . . ] Mackie TT24 Tech Note Wireless Remote Control Wireless Remote Control of the TT24 Updated: 7/20/04 by Benjamin® Olswang® The TT24 includes a powerful piece of software called TT Control. With this software, you can monitor and control the TT24 console from a PC attached via USB. Well you can, it's easy, and this is what you will need: System Requirements · · A TT24 A local PC (called the host) connected to your TT24 via USB. [. . . ] If you wish a user who is not an administrator, to have access to this computer remotely, click the "Select Remote Users. . . " button and follow the instructions. Click OK in the Systems Properties dialog box to approve your changes. Log out of your host computer, but leave the computer running and connected to your wireless network. This is done by selecting "Shutdown" from the start menu and then choosing "Log Out. " 3 Mackie TT24 Tech Note Wireless Remote Control 4. Install the remote desktop client on your client/laptop computer: The client software is installed by default on computers running Windows XP Professional, but you must install it manually on computers with other operating systems. For example, you can use an XP CD to install this feature on Win 2000, ME, 98 or 95 systems as follows: a. If you have a Windows XP CD, insert it into your client computer's CD-ROM drive. When the Welcome page appears, click "Perform additional tasks, " and then click "Setup Remote Desktop Connection. " When the installation wizard starts, follow the directions that appear on your screen. If you do not have the Windows XP CD, download the Client installer from the following link and follow the on-screen instructions: www. microsoft. com/windowsxp/downloads/tools/rdclientdl. mspx 5. (Click Start, point to Programs or All Programs, point to Accessories, point to Communications, and then click Remote Desktop Connection. ) b. In the "Computer" field, type the computer name of your host computer. The "Log On to Windows" dialog box appears on your client computer. Enter your host computer's user name, password, and domain (if required), and then click OK. The remote desktop window will open on your client computer, and you will see the desktop settings, files, and programs of your host computer. [. . . ] All other brand names mentioned are trademarks or registered trademarks of their respective holders, and are hereby acknowledged. I know I'm only the guy who writes the little copyright words at the end of tech notes, but I hope to write Ads one day (when Mr. I wrote an inter-office memo about lunchtime breaks once, everyone said it was great. Part No. [. . . ]