User manual MACKIE ONYX400F

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MACKIE ONYX400F. We hope that this MACKIE ONYX400F user guide will be useful to you.


MACKIE ONYX400F : Download the complete user guide (321 Ko)

You may also download the following manuals related to this product:

   MACKIE ONYX400F TECHNICAL INFO (54 ko)

Manual abstract: user guide MACKIE ONYX400F

Detailed instructions for use are in the User's Guide.

[. . . ] Owner's Manual Mics Backup Recorder (Analog Inputs) MIC/LINE ONY X MIC PR E 4 MIC/LINE ONY X MIC PR E 3 MIC/LINE ONY X MIC PR E 2 MIC/LINE ONY X MIC PR E INSERTS LINE IN 7 5 1 3 1 7 5 LINE OUT 3 1 L CR MIDI IN OUT IN S/PDIF ~100-240 VAC 50-60Hz 20W WORD CLOCK 4 2 8 6 8 6 4 2 R IN OUT FIREWIRE OUT Headphones For Engineer (To Monitor Recording) Stereo DAT Recorder (with S/PDIF Input) This illustrates a simple direct to 2-track recording setup. You can configure the Onyx 400F beforehand with the desired sampling rate and Inputs 1 and 2 routed to the S/PDIF output. [. . . ] MIDI Indicators These two LEDs flash whenever MIDI data appears at the MIDI IN and MIDI OUT connections. 1. When the POWER switch is turned ON (up), power is supplied to the Onyx 400F. 5. CONTROL ROOM Level Use this knob to adjust the signal level at the CR Out jacks on the rear panel. It adjusts the signal for both the left and right Control Room outputs, ranging from off () to maximum gain (MAX). Connect the CR outputs directly to the inputs of a pair of powered studio monitors. CLOCK SOURCE Indicators These three LEDs indicate the clock source currently selected for the Onyx 400F. Note: Since one of the clock source indicators is always lit when the power is on, it serves as a "power on" indicator as well. The Onyx 400F runs on its own internal, extremely accurate, lowjitter clock. Select INT when using the 400F as the master clock in a system of digital devices, or if no other clock source is available. WORD: The Onyx 400F uses the clock signal that appears at the WORD CLOCK IN [18] connection on the rear panel. Select WORD when you want the 400F to be a slave in a system of digital devices. S/PDIF: The Onyx 400F uses the clock signal embedded in the S/PDIF digital input [21] signal. [. . . ] The same signal appears at both PHONE jacks, but each has its own individual level control [6]. The same signal is also routed to the CONTROL ROOM outputs [17]. STUDIO RECORDING PREAMP WITH 192kHz FIREWIRE I/O ON CNTRL RM 1 CLOCK SOURCE INT WORD S/PDIF IN PHONES 2 MIDI OUT O O MAX O O MAX O O MAX 12 ONYX 400F [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MACKIE ONYX400F




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MACKIE ONYX400F will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.