User manual MACKIE MT3100 DATASHEET

[. . . ] SOUND PALETTE® Series The Mackie Industrial MT-3100 is an omnidirectional boundary condenser microphone designed for the ambient mic application on the SP1200 and SP2400 Program Controller/Amplifiers. [. . . ] A special elastic suspension isolates the microphone's capsule, and an electronic filter eliminates subsonic frequencies, allowing the MT-3100 to reject vibrations transmitted by the support surface. Operates on a phantom power supply ranging from 12 VDC to 48 VDC. Ambient Noise-Sensing Microphone MT-3100 MT-3100W Features Used for the ambient noise sensing feature on the SP1200 and SP2400 Low profile for discreet placement Available in black or white Electret condenser capsule operates on phantom power Red power indicator Zoned Music Distribution Automated Noise-Compensating Gain Systems Multizone Paging/Music Systems Music/Speech Reinforcement Systems 1 O Fo F26 PAAG E SE S PG A PPLI CAT IONS MT-3100 MIC MT-3100 MIC MT-3100 +10 +8 +6 +4 Ambient Noise-Sensing Microphone MT-3100 Frequency Response MT-3100 +2 dBr -0 -2 -4 -6 -8 -10 -12 -14 -16 20 50 100 200 500 1k 2k 5k 10k 20k Hz Specifications Electrical Type: Electret Condenser Polar Characteristic: Omnidirectional Output Impedance: 600 ohms Sensitivity (@ 1kHz): 20mV/Pa Frequency Response: 50Hz-20kHz Signal-to-Noise Ratio: 70 dB @ 94 dB SPL Maximum Sound Pressure Level: 130 dB SPL Power Supply: 11-52 VDC phantom supply according to DIN 45596 or IEC 268-15 Physical Connector: Dimensions: Net Weight: Accessories: XLR-M balanced 4. 7" diameter x 1. 1" high (120mm x 27mm) 4. 6 oz. (130g) 2 strips of double-sided tape for microphone attachment The microphone shall be a fixed-charge condenser type with an omnidirectional polar pattern and a frequency response of 50Hz to 20, 000Hz. It shall operate from an external phantom power source, ranging from 11 VDC to 52 VDC, and it shall have a red indicating LED on the top. The microphone shall have a nominal output impedance of 600 ohms, and the output shall be balanced. The microphone shall have a diameter of 4. 7" (120mm), a height of 1. 1" (27mm), and a weight of 4. 6 oz. It shall include 16. 4 feet (5m) of connection cable with a professional XLRM-type 3-pin terminating connector. The microphone shall be a model MT-3100 manufactured by Mackie Industrial. Architects' and Engineers' Specifications Electronic files for this product available at: www. mackieindustrial. com This Specification Sheet MT3100. PDF 16220 Wood-Red Rd. [. . . ] For this reason, any current Mackie Industrial product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated. [. . . ]