User manual MACKIE ART500 DATASHEET

[. . . ] ART Series The same careful acoustic design and advanced materials used in the ART active speakers have been utilized in the ART500 passive speaker. Combining high efficiency, high power handling and excellent sonic performance, the ART500 provides practical solutions for permanent installation applications. [. . . ] This Mackie Industrial product is covered by an exclusive, one-time NO FAULT repair policy in addition to a five year, limited warranty. Two-Way Speaker System 80° x 60° constant-directivity horn with 2" exit compression driver 15" high-gauss woofer Compact, semi-trapezoidal polypropylene enclosure Built-in hand grips, M10 fly points and stand socket Optional installation accessories include hardware for truss, grid, pipe and adjustable wall mounts Dual Speakon® connectors Exclusive Mackie Industrial -- one-time NO FAULT repair policy Five year, limited warranty Features 1 OF 6 PAGES A P PLI C AT I O N S Live Sound/Music Reinforcement High-Level AV Playback Large Speech Systems High-Level Passive Systems ART500 SPEAKER ART500 ART500 SPEAKER ART500 Two-Way Speaker System Specifications System Acoustic Frequency Range (­10 dB): Frequency Response (­3 dB): Horz. Coverage Angle (­6 dB): Directivity Factor; Q (DI): System Sensitivity1: Rated Maximum Peak2: System Input Power Rating2: Recommended Amplifier3: System Nominal Impedance: HF Protection: Crossover: Transducers Low-Frequency: High-Frequency: Physical Enclosure: 50Hz­20kHz 70Hz­17kHz 80°, nominal 60°, nominal 10. 7 (10. 3), averaged 1kHz to 10kHz 100dB 1W @ 1m 133dB @ 1m 500 W, IEC; 2000 W Peak 700 W 8 Over-voltage dampening LICC 1. 8kHz, 12dB/octave 15" (380mm) woofer with 4" (102mm) voice coil Polynomial horn-loaded 2" (51mm) exit titanium compression driver Gray, semi-trapezoidal, reinforced polypropylene Mounting: Six M10 metal threaded inserts, 1. 375" (35mm) lockable stand mount Grille: Protective perforated steel grille Input Connectors: 2 x NL4 Speakon® connector plate Dimensions (HxWxD): 29. 15" x 17. 88" x 14. 77" (740mm x 454mm x 375mm) Weight: 72. 7 lbs. (33kg) Options ART A-8 ART A-9 ART A-10 SM 1 Horizontal wall mount hardware Horizontal, adjusting wall mount bracket Vertical, adjusting wall mount bracket Tripod stand, black Measured on axis in the far field with 1 watt (2. 83 V RMS, 8 ) input and referenced to 1 meter distance using the inverse square law. 3 Recommended Amplifier is a power capability value that should be taken as a guide. 2 OF 6 PAGES ART500 Two-Way Speaker System ART500 Vertical Polars 500Hz 200Hz 0° 250Hz 315Hz 400Hz 0° 630Hz 800Hz 1kHz 1. 25kHz 0° 1. 6kHz 2kHz 2. 5kHz 0° 3. 15kHz 4kHz 5kHz 6. 3kHz Vertical Off-Axis Frequency Response (UP) 8kHz 0° 10kHz 12. 5kHz 16kHz Vertical Off-Axis Frequency Response (DOWN) 3 OF 6 PAGES ART500 Two-Way Speaker System ART500 Horizontal Polars 0° 0° 200Hz 250Hz 315Hz 400Hz 500Hz 630Hz 800Hz 1kHz 0° 0° 1. 25kHz 1. 6kHz 2kHz 2. 5kHz 3. 15kHz 4kHz 5kHz 6. 3kHz Horizontal Off-Axis Frequency Response 0° 8kHz 10kHz 12. 5kHz 16kHz 4 OF 6 PAGES ART500 Two-Way Speaker System Frequency response is measured on-axis at a distance referenced back to 1m at 1-watt drive. Frequency Directivity Index 10. 47" (266mm) 5. 35" 5. 11" (130mm) (136mm) 11. 85" (301mm) 15. 74" (400mm) 8. 26" (210mm) 8. 11" (206mm) 10. 47" (266mm) 14. 77" (375mm) 17. 28" (439mm) 14. 77" (375mm) BOTTOM SIDE 17. 88" (454mm) 17. 88" (454mm) 8. 26" (210mm) 20. 35" (517mm) 25. 31" (643mm) 29. 15" (740mm) 11. 96" (304mm) SERIAL NUMBER (SIGNAL)1+ 2­ (N. C. ) ALL CONTACTS PARALLEL WIRED MANUFACTURING DATE (GROUND)1­ 2+ (N. C. ) IMPEDANCE: 8 POWER: 500W FRONT REAR 5 OF 6 PAGES ART500 SPEAKER ART500 Two-Way Speaker System Architects' & Engineers' Specifications The loudspeaker shall be a self-contained unit, housed in a vented, reinforced polypropylene enclosure and consisting of: (1) a 15 inch low-frequency, cone driver having at least a 4 inch voice coil, (2) an 80° x 60°, high-frequency, constant-directivity polynomial horn and horn-loaded, 2 inch compression driver having a titanium diaphragm and compensated for horn resonance and ringing, (3) passive crossover network. The drivers shall be crossed over at 1. 8kHz by a 2-pole, passive network that contains equalization for the constant directivity horn and shall present a nominal 8 load to the power amplifier. When measured (1kHz­10kHz) the directivity factor shall be at least 10. 7. The loudspeaker shall be capable of operating continuously with a pink noise signal delivered at 500W RMS. It shall produce at least 100dB SPL (300Hz­3kHz) at 1m with an input of 1W RMS and its peak power handling capability shall not be less than 2000W Peak, producing 133dB SPL (1m, anechoic). The nominal frequency response of the system shall be 70Hz­17kHz ±3dB. The reinforced polypropylene enclosure shall have a volume of at least 2. 64 cu. ft. , be trapezoidal shaped and equipped with a grille to protect the cone driver. [. . . ] For this reason, any current Mackie Industrial product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated. 910-171-10 www. mackieindustrial. com 16220 Wood-Red Rd NE, Woodinville, WA 98072 USA 888. 337. 7404, fax 425. 487. 4337, industrial@mackie. com UK + 44 1268 570 808, fax + 44 1268 570 809, industrial@rcf-uk. com ITALY +39 0522 354 111, fax +39 0522 332 294, industrial@rcf. it FRANCE +33 3 8546 9160, fax +33 3 8546 9161, industrial@rcf. fr GERMANY +49 2572 96042 0, fax +49 2572 96042 10, industrial@mackie. de 6 OF 6 PAGES [. . . ]