User manual M-AUDIO PROJECT MIX CONTROL GUIDE

[. . . ] From the menu in the bottom-right corner of the welcome screen, choose ProjectMix Control. When installation is complete, you can launch the program by clicking Start > M-Audio > FireWire Family > ProjectMix Control. Mac OS X 1. Insert the FireWire Series CD-ROM into your computer's CD-ROM drive. [. . . ] Continue clicking on controls and reprogramming them until you've made all the necessary changes. Uploading Changes While performing the reprogramming detailed above, your settings are being saved on your computer only. Once you have finished editing the controls, you will need to upload these new settings to the ProjectMix I/O in order for them to take effect. Click on the first option, "Send Current Configuration to Control Surface, " to begin the upload. Once the upload completes, your changes will now be available when you engage MIDI mode on the ProjectMix I/O. 5 ProjectMix Control Guide Updating Firmware The ProjectMix I/O contains a set of processors that handle all the tasks necessary to make the unit work. Some processors handle the audio functions of the ProjectMix I/O; others handle the control surface. These processors are running programs that can be updated, just like updating software on your computer. These programs, called "firmware, " will be updated from time to time in order to enhance the functionality of the ProjectMix I/O. The latest firmware versions for both the audio interface and control surface are included in every driver package (including those on the CDROM) that are available on the M-Audio Web site (www. m-audio. com). In order to have the most recent firmware, you'll need to install the most recent driver package. The audio interface firmware is uploaded every time you start your computer. The control surface firmware, however, must be updated using the Firmware Updater supplied with ProjectMix Control. Before you update the control surface firmware, take a moment to check whether or not you actually need an update. It is quite possible that improvements may be made to the audio driver while the control surface firmware stays the same. In other words, just because there's a new driver available doesn't mean there's a new control surface firmware available, too. To see your current control surface firmware version, simply turn off the ProjectMix I/O and turn it back on. The version will be displayed on the LCD screen during initialization. You'll start the control surface firmware updater by clicking OPTIONS in the upper-left corner of the ProjectMix Control window. [. . . ] http://www. m-audio. com M-Audio Germany Kuhallmand 34, D-74613 Ohringen, Germany Technical Support e-mail: . Floor 6, Gresham House, 53 Clarenden Road, Watford WD17 1LA, United Kingdom Technical Support e-mail: . #150, Quebec City, Quebec G2E 5B7, Canada Technical Support phone (PC support): . [. . . ]