User manual M-AUDIO OXYGEN 88

[. . . ] Oxygen 88 User Guide Oxygen 88 User Guide 1 1: Introduction Congratulations on your purchase of the Oxygen 88, a premium 88-note, graded hammer-action, velocity-sensitive performance keyboard for studio and stage. Oxygen 88 features DirectLink, which provides support for qualified Digital Audio Workstations (DAW)1 such as Pro Tools. DirectLink automatically maps the track and master volume sliders, slider buttons, pan knobs, and transport controls to their corresponding functions in the application. A single USB connection not only sends MIDI data to the computer, but also provides power to the keyboard. [. . . ] Press the lowest note to be included in the zone - the LED screen will display the note value. Press the highest note to be included in the zone - the LED screen will display the note value. Repeat steps 1 - 3 to set the range of notes for the remaining Zones. Simultaneously holding down multiple Zone buttons and then setting the range as described above, will set the same Zone Range for all active Zones. This will result in the layering of all sound patches that are played. After setting the Range, activate all desired Zones by simultaneously pressing their respective Zone buttons. When assigning the lower or upper zone range limit to a black key, the LED will place a dot between the note name and the octave number to indicate a sharp note. Note Name A-1 Bb-1 G#2 A-1 A. -1 G. 2 LED Screen Oxygen 88 Zone Channel: User Guide 21 The Zone Channel (ZONE CHAN) function specifies which MIDI Channel a Zone will use when transmitting MIDI data. Assigning each Zone to its own channel will allow you to play up to 4 different sound patches on a connected synthesizer. This settings is saved as part of a User Patch when stored to a Memory Location. Press the Zone CHAN key - the LED screen will display the current Zone Channel number. Repeat steps 1 - 5 to assign set the MIDI channel for the remaining Zones. After setting the Zone channel and exiting Advanced mode, activate all desired Zones by simultaneously pressing their respective Zone buttons. Zone 1 2 3 4 MIDI Channel 0 (Global Channel) 2 3 4 Assigning a Knob, Slider, Button, or Pedal jack to a Zone MIDI Channel (Z1 and Z4), causes that control to transmit MIDI data on the same MIDI Channel as the corresponding Zone. Zone Octave The Zone Octave (ZONE OCT) function allows the pitch of a Zone to be shifted up or down, in one octave increments, to a maximum of 10 Octaves. Press the Zone OCT key - the LED screen will display the current Octave shift value. Repeatedly press the "-" or "+" button to lower or raise the Octave shift value. Repeat steps 1 - 5 to set the octave shift for the remaining Zones. After setting the Octave shift value and exiting Advanced mode, activate all desired Zones by simultaneously pressing their respective Zone buttons. Note: Zone Octave shift settings work in combination with the Global Octave shift setting (see Section 7, Octave / Transpose Buttons). This can be useful when working with different Octave or Transpose shift settings across multiple Zones. The Global Octave function shifts the entire keyboard up or down, while preserving relative pitch settings between Zones. For example, if a Zone is configured for an Octave shift of +1, and a Global Octave shift setting of +2 is applied to the keyboard, the effective octave shift for that Zone is +3. 22 User Guide Oxygen 88 Zone Transpose The Zone Transpose function (ZONE TRAN) allows the pitch of a Zone to be shifted up or down in one semi-tone (halfstep) increments, to a maximum of 12 semi-tones. Press the Zone TRAN key - the LED screen will display the current Transpose value. Repeatedly press the "-" or "+" button to lower or raise the pitch. Repeat steps 1 - 5 to set the Transpose value for the remaining Zones. After setting the Transpose value and exiting Advanced mode, activate all desired Zones by simultaneously pressing their respective Zone buttons. [. . . ] · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. Canadian Compliance Statement: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Oxygen 88 Tested to comply with FCC standards FOR HOME OR STUDIO USE Avid Oxygen Series Disposal of Waste Equipment by Users in the European Union User Guide 48 This symbol on the product or its packaging indicates that this product must not be disposed of with other waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. [. . . ]