User manual M-AUDIO MIDAIR 25 37 QUICK START GUIDE

[. . . ] MIDAIR 25/37 English Quick Start Guide Your M-Audio MidAir 25/37 wireless MIDI controller is class-compliant. This means that if you are using Windows XP or Mac OS X, you can simply connect the MidAir receiver to your computer, power up the computer and keyboard controller, and you're ready to go--no drivers required. [. . . ] Click "Finish" once the installer has completed the installation. Connect your MidAir receiver to an available USB port using the supplied cable. Windows will identify the receiver and will ask if you want to search the Internet for a driver. Select "No, not this time" and press "Next" ( 1 ). Choose "Install software automatically" and click "Next. " 10. Once the installation is complete, you will see a message pop up stating, "Your new hardware is installed and ready to use. " 2 1 MidAir 25/37 Quick Start Guide » 1 English Quick Installation - Windows XP / Mac OS X Linking the Keyboard and Receiver Your MidAir keyboard and receiver are linked at the factory and should be ready to use right out of the box. In a small number of cases, the keyboard and the receiver may not automatically connect when both are powered on for the first time. If this happens, the Wireless Connection Status LED found on each of the two units will flash and eventually turn off. To resolve this issue, simply press the wireless connect buttons on the receiver and the keyboard and allow the two units to connect wirelessly. Once a link is established, the Wireless Connect Status LEDs will stay illuminated, and you'll be ready to go. Using MidAir in Host and Standalone Modes Standalone Mode When using the MidAir system in standalone mode (without a computer), you must make sure the receiver's Standalone Mode switch is set properly. However, you can manually configure the receiver to use only the physical MIDI input jack or only the wireless MIDI port by setting the Standalone Mode switch accordingly Refer to the User Manual found on the MidAir Series CD-ROM for more information about using MidAir in standalone mode. Host Mode When operating your MidAir system in host mode (with a computer), you'll need to configure your audio software to receive MIDI data from the MidAir receiver. Your software will detect two MidAir MIDI input ports: < < The first port is the wireless MIDI input. [. . . ] All other trademarks contained herein are the property of their respective owners. 2 » MidAir 25/37 Quick Start Guide M-Audio USA 5795 Martin Rd. , Irwindale, CA 91706 M-Audio Germany Kuhallmand 34, D-74613 Ohringen, Germany Technical Support web: tel (pro products): tel (consumer products): fax (shipping): www. m-audio. com/tech (626) 633-9055 (626) 633-9066 (626) 633-9032 Technical Support e-mail: tel: fax: support@m-audio. de +49 (0)7941 - 9870030 +49 (0)7941 98 70070 Sales e-mail: info@m-audio. de +49 (0)7941 98 7000 +49 (0)7941 98 70070 www. m-audio. de tel: fax: Sales e-mail: tel: fax: sales@m-audio. com 1-866-657-6434 (626) 633-9070 www. m-audio. com Web M-Audio Canada Web M-Audio U. K. Floor 6, Gresham House, 53 Clarenden Road, Watford WD17 1LA, United Kingdom 1400 St-Jean Baptiste Ave. #150, Quebec City, Quebec G2E 5B7, Canada Technical Support email: techcanada@m-audio. com (418) 872-0444 (418) 872-0034 phone: fax: Technical Support e-mail: tel:(Mac support): tel: (PC support): support@maudio. co. uk +44 (0)1765 650072 +44 (0)1309 671301 Sales e-mail: infocanada@m-audio. com (866) 872-0444 (418) 872-0034 www. m-audio. ca phone: fax: Sales tel: fax: +44 (0)1923 204010 +44 (0)1923 204039 www. maudio. co. uk Web M-Audio France Web Floor 6, Gresham House, 53 Clarenden Road, Watford WD17 1LA, United Kingdom Renseignements Commerciaux tel : e-mail : 0 810 001 105 info@m-audio. fr Assistance Technique PC : MAC : 0 0820 000 731 0 0820 391 191 Assistance Technique e-mail : fax : support@m-audio. fr mac@m-audio. fr +33 (0)01 72 72 90 52 www. m-audio. fr Site Web 060515_MidAir_QSG_EN01 [. . . ]