User manual M-AUDIO DCP-200

[. . . ] User Guide Precaution Thank you for purchasing this digital instrument. For perfect operation and security, please read the manual carefully and keep it for future reference. Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol within an equilateral triangle is in tended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the product. Important Safety Instructions 1) Read these instructions. (Figure 1) 6) Please use the production near the electric socket to unplug easily; 7) Clean only with dry cloth. 8) Do not block any ventilation openings, install in accordance with the manufacturer s instructions. [. . . ] This sound will be used for your right hand once you activate Split Mode. 1 PNo Reverb Voice / -- Function P resstheVoice/FunctionbuttontoenterEditMode. Song Metronome RECORD Data Control [Assignable] 2 MASTER VOLUME Press the Bb-1 key to enter Split Mode. SPL Reverb Voice / -- Function TheLEDdisplaywillshow: C0 Bb--1 C1 Song Metronome RECORD Data Control [Assignable] This will be displayed for 1 second. Then theLEDdisplaywillchangetoshowthe currently selected Split Voice (Left Hand Voice). The default Split Voice is Acoustic Bass. The selected Split Voice (Left Hand Voice) is played in the section of the keyboard from the lowest (left-most) key up to and including the selected Split Point key. (Selecting the Split Point will be explained in the next section. ) The originally selected Voice (Right Hand Voice) is played in the section of the keyboard to the right of the selected Split Point key up to and including the highest key on the keyboard. (The LEDdisplaywillshowthenameoftheLeft Hand Voice. ) Note for MIDI Users The Right Hand Voice (Main Voice) will remain on the previously selected Main MIDI Transmit Channel. The Left Hand Split Voice will be played on the next highest Main MIDI Transmit Channel (Main MIDI Transmit Channel +1). For information on setting the MIDI Transmit Channel, please read the section entitled MIDI Transmit Channel in the MIDI Functions portion of this User Guide. MPORTANT: I If Voice Select is now used, it will only affect the Left Hand Split Voice. The Right Hand Voice will stay the same until Split Mode is turned off again. DCP-200 User Guide 31 To change the Split Point: 1 PNo Reverb Voice / -- Function PresstheVoice/FunctionButtontoenterEditMode. Song Metronome RECORD Data Control [Assignable] 2 MASTER VOLUME Press and hold the Split Mode (Bb-1) key. C0 Bb--1 SPL Reverb Voice / -- Function C1 Song Metronome RECORD Data Control [Assignable] T heLEDdisplaywillshow`SPL'for1 second. After 1 second the display will beginflashing`SPL. ' 3 Press any key on the keyboard between C0 and C7 to select the Split Point. (The split point cannot be set lower than C0. ) The default values for Split Mode are: Default Split Point: Default Voices: MIDI Transmit Channel: Default Volume Level: Eb3 7. Upright Bass (L Hand), 0 Grand Piano (R Hand) Left Hand Voice on MIDI Transmit Channel +1 127 32 DCP-200 To Independently Control Volume Levels of Left Hand and Right Hand Voices: · LeftHandVoiceVolume: User Guide 1 PNo Reverb Voice / -- Function PresstheVoice/FunctionbuttontoenterEditMode. Song Metronome RECORD Data Control [Assignable] 2 MASTER VOLUME SPL Reverb Voice / -- Function Press the Bb0 key to assign the Data Control knob to control the Split Voice (Left Hand Voice) volume. C0 Song Metronome RECORD TheLEDdisplaywillshow: Data Control [Assignable] C1 Bb0 3 100 Reverb Voice / -- Function Use the Data Control knob to select a Split Voice volume level between 1 (minimum) and 127 (maximum). You can play as you do this to hear the volume change. Song Metronome RECORD Data Control [Assignable] DCP-200 · RightHandVoiceVolume: User Guide 33 1 120 Reverb Voice / -- Function P resstheVoice/FunctionbuttontoenterEditMode. Song Metronome RECORD Data Control [Assignable] 2 MASTER VOLUME vol Reverb Voice / -- Function Press the F#0 key to assign the Data Control knob to control the Right Hand Voice volume. C0 Song Metronome RECORD Data Control [Assignable] C1 F#0 TheLEDdisplaywillshow: 3 80 Reverb Voice / -- Function Use the Data Control knob to select a Right Hand Voice volume level between 1 (minimum) and 127 (maximum). You can play as you do this to hear the volume change. Song Metronome RECORD Data Control [Assignable] 34 DCP-200 To turn off Split Mode: User Guide 1 80 Reverb Voice / -- Function Press the Voice/Function button. Song Metronome RECORD Data Control [Assignable] 2 MASTER VOLUME oFF Reverb Voice / -- Function Press the Split Mode key (Bb-1) to turn off Split Mode. ThentheLEDdisplaywillreturnto showing the name of the currently selected Voice. Song Metronome RECORD Data Control [Assignable] C0 Bb-1 C1 DCP-200 Layer Mode In Layer Mode, DCP-200 will play two voices simultaneously on each key. User Guide 35 To use Layer Mode: 1 PNo Reverb Voice / -- Function PresstheVoice/FunctionbuttontoenterEditMode. Song Metronome RECORD Data Control [Assignable] 2. MASTER VOLUME LYR Reverb Voice / -- Function Song Metronome RECORD Data Control [Assignable] Press and hold down a Voice Select key (any white key in the lowest octave of the piano). (See the section on Using the Voice Select Keys atthebeginningoftheEditModeFunctions section for more information on selecting voices in this manner. ) Church Organ Upright Bass Vintage EP Bright Piano Grand Piano Harpsichord Strings FM EP 2 3 3. hilecontinuingtoholdthefirstVoice W Select key, press a second Voice Select key. While both keys are held down the display will show: < DCP-200 is now in Layer Mode. (Intheexampleillustration, BrightPianoistheMainVoice(becauseitisselectedfirst), andStrings is the Layer Voice (because it is selected second). the Data Control knob is used to change voices while in Layer Mode, it will affect the Layer Voice only. [. . . ] Send`AllNotesOff'CommandonMIDIChannel1-externalandtotheinternalsoundengine 3. end`ResetAllControllers'CommandonMIDIChannel1-externalandtotheinternalsound S engine 4. Set Volume levels for Main Voice, Split Voice and Layer Voice to defaults 6. Set the Reverb Depth back to the default value for the Default Voice 13. [. . . ]