User manual M-AUDIO AUDIOBUDDY

[. . . ] All of these mixers have two things in common: 1. ) they are exceedingly quiet -- quieter than 99% of all mixers on the market and 2. ) they are uniquely configured to meet the specific needs of the MIDI and multimedia musician. This is because the unit's simple and efficient design and ultra compact layout eliminates much of the noise. The unit also has a higher than usual voltage "rail" across its internal opamps. [. . . ] Gain Control for Preamp 1: Adjusts the Output 1 volume level for Preamp 1. If a signal is present at either the high impedance in or the XLR in of Preamp 1 and the Clipping LED stays lit, turn down this gain control and adjust accordingly. Phantom Power Indicator LED: When the phantom power switch on the back of the unit is in, this LED will light indicating that phantom power has been turned on for both XLR in 1 and XLR 2. there is no independent phantom power control for each of the channels. 8. Main Power Indicator LED: When power is properly applied to the Audio Buddy and when the front power switch is in, the main power LED will light indicating that the unit is turned on. Power Switch: When power is properly applied to the Audio Buddy and this switch is pressed in, the Audio Buddy is turned on. The rear panel power jack of the Audio Buddy accepts a 9-Volt AC, 500 milliamp power adapter. IMPORTANT: Audio Buddy will not function unless it receives power at this jack and the front panel power switch is pushed in. Outputs 2 and 1: These are the main outputs for the dual Audio Buddy preamps. They provide unbalanced outputs if a tip-sleeve 1/4" plug is used. Or, they provide balanced outputs if a tip-ring-sleeve (stereo) 1/4" plug is used. The level of these outputs are independently controlled by the front panel gain controls. Phantom Power Switch: When in, phantom power is turned on for both XLR In 1 and In 2. When in, the front panel phantom power indicator LED will light showing that phantom power is on. XLR-In 1&2: (#15 is 1; #14 is 2) Balanced XLR inputs for preamps 1 and 2. When the rear phantom power switch is in, phantom power is turned on to both jacks. [. . . ] Register online at www. maudio. com/register to receive FREE product updates and for the chance to win M-Audio giveaways. Product features, specifications, system requirements and availability are subject to change without notice. Avid, M-Audio and Audio Buddy are either trademarks or registered trademarks of Avid Technology, Inc. [. . . ]