User manual LOWRANCE XOG

[. . . ] 988-0160-451 Mapping GPS and Multimedia Player Operation Instructions Copyright © 2007 Navico All rights reserved. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Lowrance. Any unauthorized commercial distribution of this manual is strictly prohibited. Navico® is a registered trademark and XOGTM is a trademark of Navico, Inc. [. . . ] Once the text language is selected, press NEXT and the Language ­ Voice menu will appear. Use this menu to select what language the unit speaks when giving turn-by-turn instructions. Safety Mode The unit has a Safety Mode to prevent vehicle drivers from operating the unit while a vehicle is in motion. The touchscreen buttons are temporarily disabled whenever Safety Mode is on. For more information about Safety Mode refer to the Auto Safety Warning insert included with the unit's documentation. Sound and Voice Setup Use the Sound and Voice Setup menu to adjust audio output. In the Sounds menu, press inside the box to the left of each feature to check it (turn on) or uncheck it (turn off). Key Sounds: When this feature is on the 28 unit will emit a sound every time a command is entered. Voice Instructions: If Voice Instructions are turned off, voice instructions can still be accessed by pressing the SPEAK button on the map screen. Verbose Mode: This feature will cause the unit to give slightly more de- tailed spoken navigation instructions. Read Street Names: When this feature is active the unit will speak the name of streets being navigated. Read Distances: When this feature is active the unit will speak the distance to the next turn. Music Volume: This setting only affects music playback; spoken instruc- tions will remain unchanged. Periodic Voice: Use this feature to increase or decrease the frequency of spoken instructions. Voice instructions are repeated at set intervals and are intended as reminders. Voice Volume: This setting only affects spoken instructions; music vol- ume will remain unchanged. Master Volume: This setting affects all audio output. Interface Setup Interface Options controls the visual display of the unit, including brightness, contrast and the "graphical" skin. To change the skin display touch inside the Interface Selection box and a drop-down Interface Options list will appear showing all of the available skins. button layout. Keyboard: Changes the keyboard button Brightness: Controls the brightness of the screen. Transparency: Controls the transparency of Overlay Data Boxes. When this feature is off the screen will stay at a constant brightness. Moving the slider to the left will cause the screen to dim after a set amount of time. Calibration Screen: If the touch screen isn't responding correctly try calibrating the screen. Press the target icon and a new target icon will appear somewhere on-screen. 30 Power Key: Power Off and Standby Power Off is the unit's default mode. Standby mode allows the unit to "sleep" and draw very little battery power. If the unit is left idle for 12 hours, it will automatically leave Standby mode and switch to a full shut down to save battery power. To place the unit in Standby mode, select STANDBY in the bottom right corner of the Interface Options screen. Units of Measure This feature adjusts the units of measure, including speed and distance, heading, time and date. [. . . ] NauticPathTM USA Marine Electronic Charts NauticPathTM USA map cards show offshore/coastal navigational detail. This plug and play map card provides electronic charts covering the U. S. East and West coasts, Hawaii, Gulf coast, Great Lakes, Alaska, the Bahamas, Puerto Rico and the U. S. NauticPath features depth contours, intertidal zones and spot soundings, navigational aids with view range and coverage. [. . . ]