User manual LOWRANCE IFINDER PHD

[. . . ] 988-0148-641 www. lowrance. com iFINDER PhD Mapping GPS & MP3 Player Operation Instructions Copyright © 2005 Lowrance Electronics, Inc. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Lowrance. Any unauthorized commercial distribution of this manual is strictly prohibited. iFINDER PhD and Lowrance® are registered trademarks of Lowrance Electronics, Inc. [. . . ] Press EXIT to clear the cursor. Tip: The iFINDER PhD has an extremely handy Cursor Undo feature that lets you instantly return to the previous location you were looking at. It works like this: Use the cursor (arrow keys) to scroll the map to some far away location or waypoint. Press EXIT clear the 39 cursor and jump back to your current position on the map. When you want to take another peek at that distant place, just press EXIT again. You can use this trick to toggle between your current position and your destination without a lot of scrolling. Selecting Any Map Item with the Cursor 1. Use the zoom keys and the arrow keys to move around the map and find the item you wish to select. Use the arrow keys and center the cursor cross-hair on the desired object. You will also notice a black ring surrounds the item as it becomes selected. Once that happens, if you press FIND the Find Menu will pop up with an extra option at the top of the list: SELECTED ITEM. Press ENT to see the Waypoint Information screen for the selected item. Icons Icons are graphic symbols used to mark some location, personal point of interest or event. They can be placed on the map screen, saved and recalled later for navigation purposes. iFINDER has 42 different symbols you can pick from when creating an icon. Icons are similar to waypoints, but they do not store as much information (like names) as waypoints do. You can't use a menu to navigate to icons as you can with waypoints. ( But, you can use the map cursor and navigate to any icon on the map. ) You can create an icon at the cursor position on the map, or at your current position while you are navigating. Create Icon on Map 1. Use the arrow keys to move the cursor to the place where you want to make an icon. Press and hold ENT until the screen shows a "Save Icon" menu, then release the ENT key. The icon appears on the map. 40 Save icon menu, left, Select symbol menu, right. While you are traveling, press and hold ENT until the screen shows a "Save Icon" menu, then release the ENT key. Delete an Icon You can delete all the icons at one time, you can delete all icons represented by a particular symbol, or you can use the cursor to delete a selected icon from the map. Press to DELETE ALL ICONS, DELETE BY SYMBOL, or DELETE FROM MAP and press ENT. Delete icons menu. Load GPS Data Files from an MMC GPS Data files, containing waypoints, routes, trails and event marker icons, must be copied from an MMC to iFINDER's internal memory before iFINDER can read them. Press MENU|MENU| to SYSTEM SETUP|ENT| to TRANSFER MY DATA|ENT and the screen below appears. The Transfer My Data submenu asks if you want to save data to the MMC or load data from the MMC into iFINDER's memory. 2. The Transfer My Data menu includes a message which tells you if an MMC is present or not. [. . . ] If you're in the United States and you have technical, return or repair questions, please contact the Factory Customer Service Department. Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. To call us, use the following toll-free number: 800-324-1356 8 a. m. [. . . ]