User manual LOWRANCE IFINDER HUNT

[. . . ] 988-0148-481 www. lowrance. com Handheld Mapping GPS Receiver Operation Instructions Copyright © 2004 Lowrance Electronics, Inc. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Lowrance. Any unauthorized commercial distribution of this manual is strictly prohibited. iFINDER HUNT and Lowrance® are registered trademarks of Lowrance Electronics, Inc. [. . . ] 3, Easy Mode Operation, for further explanation and more illustrations of the Map Page. To get to Map Page: Map page is the default when iFINDER is turned on. To switch from another page to the Map Page, press PAGE repeatedly until the page you want appears. NOTE: The screen shows an indicators of what iFINDER's microprocessor is doing, similar to the floppy drivel ight on a PC. In the lower right corner of the screen, a special icon (MMC symbol) will appear and disappear from time to time. When this icon appears, iFINDER is reading information from the MMC. Map Page, left, Map Menu, right. Map Menu The map menu has many options. The map menu allows you to find distances, change the orientation of your map, view map data, and other helpful map functions. Moving Around the Map: Zoom & Cursor Arrow Keys The map is presented from a bird's-eye view perspective. If the zoom range says "4 mi, " the map shows an area 4 miles wide from the left edge of the screen to the right edge of the screen. Press the ZIN key (zoom in) to move in closer and see greater detail in a smaller geographic area. Press the ZOUT key (zoom out) to move farther away and see less map detail, but a larger geographic area. 47 You can pan or scroll the map northward, southward, eastward or westward by using the arrow keys, which launches the cross-hair map cursor. To clear the cursor, press EXIT, which jumps the map back to the current position or the last known position. Find Distance From Current Position To Another Location 1. Center your cursor over the position you want to find the distance to. A rubber band line appears, connecting your current position to the cursor's location. The distance along that line will appear in the lower left-hand corner of the screen. Press EXIT to return to regular operation. The distance to Dallas from the starting point is 211. 1 miles. Find Distance From Point to Point You can also measure distance between two other points on the map. (A rubber band line appears, connecting your current position to the cursor's location. ) Press ENT to set the first point, and the rubber band line disappears. The rubber band line reappears, connecting the first point you set to the cursor. The distance along that line will appear in the lower left-hand corner of the screen. Press EXIT to clear the command and return to the page screen. Find Your Current Position Finding your current position is as simple as turning iFINDER on. Under clear sky conditions, the unit automatically searches for satellites and calculates its position in approximately one minute or less. 48 NOTE: "Clear sky" means open sky, unobstructed by terrain, dense foliage or structures. [. . . ] If you're in the United States and you have technical, return or repair questions, please contact the Factory Customer Service Department. Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. To call us, use the following toll-free number: 800-324-1356 8 a. m. [. . . ]