User manual LOWRANCE IFINDER H2O C

[. . . ] 988-0148-811 www. lowrance. com iFINDER H2Oc Handheld Mapping GPS Receiver Operation Instructions Copyright © 2005 Lowrance Electronics, Inc. Energizer and e2 are registered trademarks of Energizer Holdings, Inc. Points of Interest Data in this unit are by infoUSA, copyright 2001-2004, All Rights Reserved. infoUSA is a trademark of infoUSA, Inc. eXitSource Database, copyright 2001-2004 Zenrin Co. Ltd. Lowrance Electronics may find it necessary to change or end our policies, regulations and special offers at any time. [. . . ] Cancel Navigation: turns off the navigation command after you have reached your destination. 42 GPS Setup: gives access to GPS receiver options, like GPS Simulator, Track Smoothing and GPS Auto Search. System Setup: give access to general configuration options like, Units of Measure, Set Local Time, Reset Options, Popup Help and Transfer My Data. Utilities: allows users to modify settings for Sun/Moon calculator, Trip Calculator, Timers and Alarm Clock. Easy Mode shows only the most commonly used features to simplify the interface and operation. Browse MMC Files: load from or save to an MMC card GPS Data Files containing waypoints, routes, trails and event marker icons. Pages Advanced Mode has four Page displays that represent the four major operating modes. They are the Satellite Status Page, Digital Data page, Navigation Page and Map Page. Pressing PAGES repeatedly scrolls through the four screens in an endless loop. You access a Page Submenu by pressing the MENU key while the page is displayed. (Pressing the Menu key twice will always take you to the Main Menu. ) NOTE: In Advanced Mode, you can remove the pages you do not want to have in the Pages rotation. Use the keys to select desired pages, then press ENT to turn them on (check) or turn them off (uncheck). Satellite Status Page This page provides detailed information on the status of the iFINDER's satellite lock-on and position acquisition. No matter what page you are on, a flashing current position indicator/question mark symbol and flashing GPS data displays indicate that satellite lock has been lost and there is no position confirmed. This page shows the quality and accuracy of the current satellite lock-on and position calculation. WARNING: Do not begin navigating with this unit until the numbers have stopped flashing! 43 NOTE: Refer to Sec. 2, Easy Mode Operation, for further explanation and more illustrations of the Satellite Page. To get to the Satellite Status Page press PAGES repeatedly until it appears on the screen. To get to Satellite Status Menu press MENU when the Satellite Status page is displayed on the screen. Satellite Status Page (left) with Satellite Status Menu (right). Status Menu The Satellite Status Menu allows you to set your own GPS options such as track smoothing, and whether you want the GPS engine to stop searching (a power-saving function for use indoors). Digital Data Page This page provides detailed information on the position of the iFINDER's cursor. From this page, you can determine your latitude, longitude, altitude, travel time, speed and other useful information about your position and trip. To get to the Digital Data Page press PAGES repeatedly until it appears on the screen. To get to Digital Data Page menu press MENU when the Digital Data page is on the main display. 44 Digital Data page (left) with the Digital Data Menu (right). Digital Data Menu The Digital Data Menu allows you to change units of measure and to customize the digital data boxes with the data most important to you. [. . . ] If you're in the United States and you have technical, return or repair questions, please contact the Factory Customer Service Department. Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. To call us, use the following toll-free number: 800-324-1356 8 a. m. [. . . ]