User manual LOWRANCE IFINDER EXPEDITION C

[. . . ] 988-0160-011 www. lowrance. com Mapping GPS & MP3 Player Operation Instructions Copyright © 2006 Lowrance Electronics, Inc. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Lowrance. Any unauthorized commercial distribution of this manual is strictly prohibited. iFINDER® and Lowrance® are registered trademarks of Lowrance Electronics, Inc. [. . . ] Icons are similar to waypoints, but they do not store as much information and you can not use a menu to navigate to icons as with waypoints. You can create an icon at the cursor position on the map or at your current position, while you are navigating. Create Icon on Map 1. Press and hold ENT until the screen displays Save Icon, then release the ENT key. While you are traveling, press and hold ENT until the screen shows the Save Icon menu, then release the ENT key. You can delete all the icons at one time, delete all icons represented by a particular symbol or use the cursor to delete an icon selected from the map. Press to DELETE ALL ICONS, DELETE BY SYMBOL or DELETE FROM MAP and press ENT. Delete icons menu. Load GPS Data Files from an MMC GPS Data files, containing waypoints, routes, trails and event marker icons, must be copied from an MMC to the iFINDER's internal memory before the iFINDER can read them. Press MENU|MENU| to SYSTEM SETUP|ENT| to TRANSFER MY DATA|ENT and the screen below appears. 50 The Transfer My Data menu asks if you want to save data to the MMC or load data from the MMC into the iFINDER's memory. 2. If no MMC is present, you must insert a card into the iFINDER to activate the LOAD or SAVE commands. Loading: There may be more than one GPS Data File (*. USR) on the card. To select a file, press ENT to activate the selection box, use to highlight the file, then press ENT to accept the selection. Saving: To accept the default name Data for the GPS Data File, press to SAVE|ENT. If you wish to rename the file (as in the example below), press ENT to activate the selection box. Press to change the first character, then press to the next character and repeat until the name is correct. Then press ENT| to SAVE|ENT. The unit will display a completion message when the data transfer is finished. To return to the main page display, press EXIT repeatedly. Navigate Navigation is one of the primary reasons GPS users choose the iFINDER. The unit provides trip information about where you want to go, how to get there and how long it will be before you arrive. Navigate Back Home You can navigate to the Home waypoint created in Easy Mode, but you must use Advanced Mode's procedure for navigating to a waypoint. Navigate Back to Man Overboard Waypoint This unit has a man overboard feature that shows navigation data to the location where the feature was activated. Your position at the time these keys are pressed is used as the man overboard position. Cancel Navigation In Easy Mode: Press MENU| to CANCEL NAVIGATION|ENT| to YES|ENT. In Advanced Mode Press MENU|MENU| to CANCEL NAVIGATION|ENT| to YES|ENT. Navigate a Route 1. [. . . ] SKELLY DRIVE, TULSA, OK 74128 (800) 324-1356 133 How to Obtain Service. . . . . . in the USA: We back your investment in quality products with quick, expert service and genuine Lowrance parts. If you're in the United States and you have technical, return or repair questions, please contact the Factory Customer Service Department. Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. [. . . ]