User manual LOWRANCE GLOBALMAP BAJA 840C ADDENDUM II

[. . . ] 988-0160-441 GlobalMap® Baja 840C Mapping GPS Receivers Operation Instructions Copyright © 2007 Lowrance Electronics, Inc. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Lowrance Electronics. Any unauthorized commercial distribution of this manual is strictly prohibited. Fishing Hot Spots® is a registered trademark of Fishing Hot Spots Inc. [. . . ] The following figures show what the Navigation Page and Map Page look like while navigating a route. Navigate a Route in Reverse Here's how you run a route backwards, from the end waypoint to the beginning waypoint. From the NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE, press MENU|MENU| to ROUTE PLANNING|ENT. Press to select route name|ENT| to NAVIGATE| to REVERSE|ENT| to NAVIGATE|ENT. Upon arrival at your destination, cancel navigation: press MENU|MENU| to CANCEL NAVIGATION|ENT| to YES|ENT. 63 Figure 1. Figure 2. Figure 3. Figure 4. Navigating along a route: Fig. 1 shows the GlobalMap Baja Navigation Page at the start of a route, heading straight for the first waypoint (Wpt 1). 2, the traveler has arrived at Wpt 1; the arrival alarm has been triggered and the bearing arrow on the compass rose has turned to point east, toward Wpt 2. 3 the traveler has turned east on his new course and is heading straight for Wpt 2, which is 2. 15 miles away. In this figure, the traveler has reached Wpt 2 and is half-way along the leg between Wpts 2 and 3. Trails Delete a Trail This is the command used to erase or delete a trail: Press MENU|MENU| to MY TRAILS|ENT| to trail name|ENT| to DELETE TRAIL|ENT| to YES|ENT. Tip: You can also delete all trails at once: 1. 64 Edit a Trail Name To edit a trail name: press MENU|MENU| to MY TRAILS|ENT| to trail name|ENT|ENT. Press or to change the first character, then press to the next character and repeat until the name is correct. Press ENT then EXIT|EXIT|EXIT|EXIT to return to the previous page display. Tip: You can quickly call up the Edit Trail menu by selecting a trail on the map with the cursor. Press WPT and the Edit Trail menu opens. Trail selected with map cursor (left). The pop-up box shows distance and bearing from current position to the selected point on the trail. The Edit Trail menu (right). Edit a Trail Color To edit a trail color: press MENU|MENU| to MY TRAILS|ENT| to trail name|ENT| to COLOR|ENT. Edit a Trail Pattern To edit a trail pattern: press MENU|MENU| to MY TRAILS|ENT| to trail name|ENT| to PATTERN|ENT. Press or to change the first character, then press to the next character and repeat until the pattern is correct. Press ENT, then EXIT|EXIT|EXIT|EXIT to return to the previous page display. 65 Edit Trail Menu with Pattern option selected (left). transparency Utilities Utilities are useful tools for traveling or for outdoor activities. Alarm Clock To get to the alarm clock menu: press MENU|MENU| to TIMERS|ENT| to ALARM CLOCK|ENT. Sun/Moon Rise & Set Calculator To get to the Sun/Moon menu: press MENU|MENU| to SUN/MOON CALCULATIONS|ENT. Trip Calculator To get to the Calculator menu: press MENU|MENU| to TRIP CALCULATOR|ENT. Trip Down Timer To get to the Down Timer menu: press MENU|MENU| to TIMERS|ENT| to DOWN TIMER|ENT. Trip Up Timer To get to the Up Timer menu: press MENU|MENU| to TIMERS|ENT|ENT. Waypoints Delete a Waypoint To delete a waypoint from the waypoint list: press WPT|ENT|ENT|ENT| to waypoint name|ENT| to DELETE WAYPOINT|ENT| to YES|ENT. [. . . ] If you're in the United States and you have technical, return or repair questions, please contact the Factory Customer Service Department. Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. Central Standard Time, M-F 800-324-1356 Lowrance Electronics may find it necessary to change or end our shipping policies, regulations, and special offers at any time. [. . . ]