User manual LOWRANCE GLOBALMAP SPORT

[. . . ] GlobalMap Sport INSTALLATION AND OPERATION INSTRUCTIONS TM ® LOWRANCE ELECTRONICS, INC. 12000 E. SKELLY DR. , TULSA, OK 74128 1 Copyright © 1996 Lowrance Electronics, Inc. GlobalMap SportTM, IMS SmartMapTM are trademarks of Lowrance Electronics, Inc. A CAREFUL NAVIGATOR NEVER RELIES ON ONLY ONE METHOD TO OBTAIN POSITION INFORMATION. [. . . ] Next, press the MENU key, then move the black box to the desired timer set menu. A screen similar to the one below appears. Using the right and left arrow keys, move the black box to the first number in the time that you want to set. (The time is in hours, minutes, and seconds) Now press the up or down arrow keys until the desired number shows. Continue until the time shown in the display is correct, then press the ENT key. To start the timer, press the MENU key, then move the black box to the "Dn Timer STOP/ GO" label. If you turn the up timer's alarm on (press the right arrow key when the black box is on the (Up ALM. . . Off/On label), it will sound a tone when it reaches the time you entered in the up timer set menu. Press the EXIT key to silence the alarm. 28 You can reset either alarm to the time you originally set by pressing the MENU key, then moving the black box to either the "Up Timer Reset" or "DN Timer Reset" label, then press the right arrow key. REPROGRAM WINDOWS GROUPS All of the 15 windows groups can be customized. The changes you make to the groups will remain in memory, even if all power is removed from the unit. You can, however, return the groups to the factory settings from the "Preset Groups" menu. Before you reprogram a group, you may wish to view all of the possible windows that make up the windows groups. Now move the black box to the "View Windows" label and press the right arrow key. When you're finished, press the EXIT key. To customize a group, first switch to a windows group. Next, press the MENU key, then press the up or down arrow key until the "Reprogram Groups" menu is surrounded by the black box. A screen similar to the one shown at right appears. You'll see the group selection menu at the top of the screen. Using the left or right arrow keys, choose the group you want to change. When the desired group letter is showing in the box (and in the background), press the up arrow key to change it. The unit flashes a message on the screen, telling you it's 29 adding the new window to the group. You can now press the right or left arrow keys to select the next window in the group. When you're finished selecting windows before filling the group with windows, press the EXIT key. If you fill the group with windows, the unit will automatically leave the reprogram groups menu after the last window is selected. Note:The digital boxes on the navigation and map #4 screens can also be re-programmed. [. . . ] If you need service or repairs, contact the Lowrance Factory Customer Service Department at the toll-free number listed below. A technician may be able to solve the problem and save you the inconvenience of returning your unit. You will be asked for your unit's serial number. 800-324-1356 Canada Only. Always use the original shipping container and filler material the product was packed in when shipping your product. [. . . ]