User manual LOWRANCE GLOBALMAP 7200C

[. . . ] 988-0151-521 GlobalMap® 7200C, GlobalMap® 7300C HD, GlobalMap® 8200C, GlobalMap® 8300C HD, GlobalMap® 9200C, GlobalMap® 9300C HD, Operation Instructions Mapping GPS Receivers Copyright © 2006 Lowrance Electronics, Inc. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Lowrance Electronics. Any unauthorized commercial distribution of this manual is strictly prohibited. Fishing Hot Spots® is a registered trademark of Fishing Hot Spots Inc. [. . . ] Edit Route Waypoints menu (right), with Add From Map command selected. 3. Use the Zoom keys and arrow keys to move the map and cursor until the cursor is centered on the spot where you want your route to begin (If you are starting at your current position or the current cursor position, you are already at the starting spot. ). In this example, we started our route at the intersection of 11th Street and 145th E. With point (2) set, move cursor east to mark interstate on-ramp with waypoint (3). In figures 2 and 3, notice the rubber band line extending from the previously set waypoint to the cursor. Move the cursor to the next point in the route, a spot where you need to turn or change direction, and press ENT to set the next waypoint. The unit reverts to the Edit Route screen, with the route automatically named "Route 1" and stored in the GlobalMap's internal memory (In our example, Route 1 already existed, so the unit automatically made "Route 2. "). You can edit the route and run other commands, but if you are finished with the route for now, return to the last page displayed by pressing EXIT repeatedly. From the NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE press MENU|MENU| to ROUTE PLANNING|ENT. From the NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE press MENU|MENU| to ROUTE PLANNING|ENT. From the NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE press MENU|MENU| to ROUTE PLANNING|ENT. Press or to change the first character, then press to move the cursor to the next character and repeat until the name is correct, then press ENT. From the NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE press MENU|MENU| to ROUTE PLANNING|ENT. Use and to select a waypoint, then press ENT. Edit Route Waypoints menu. 3. Use and to select a command from the Edit Route Waypoints menu and press ENT. Add From Map lets you insert a waypoint in the route by selecting a location with the cursor then pressing ENT. Add Waypoint calls up the Waypoint List so you can insert a waypoint from the list. View Waypoint will show you where the selected waypoint is on the map. From the NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE, press MENU|MENU| to ROUTE PLANNING|ENT. Route Planning command on Main Menu (left); Routes menu (center); Edit Route menu (right) with navigate command is selected. 2. Upon arrival at your destination, cancel navigation: press MENU|MENU| to CANCEL NAVIGATION|ENT| to YES|ENT. The following figures show what the Navigation Page and Map Page look like while navigating a route. Navigate a Route in Reverse Here's how you run a route backwards, from the end waypoint to the beginning waypoint. [. . . ] If you're in the United States and you have technical, return or repair questions, please contact the Factory Customer Service Department. Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. Central Standard Time, M-F 800-324-1356 Lowrance Electronics may find it necessary to change or end our shipping policies, regulations, and special offers at any time. [. . . ]