User manual LOWRANCE GLOBALMAP 2000

[. . . ] GlobalMap 2000 INSTALLATION AND OPERATION INSTRUCTIONS TM Copyright © 1997, 1998 Lowrance Electronics, Inc. GlobalMap 2000TM is a trademark of Lowrance Electronics Lowrance® is a registered trademark of Lowrance Electronics WARNING!A CAREFUL NAVIGATOR NEVER RELIES ON ONLY ONE METHOD TO OBTAIN POSITION INFORMATION. Never use this product while operating a vehicle. CAUTION When showing navigation data to a position (waypoint), this unit will show the shortest, most direct path to the waypoint. [. . . ] If the waypoint location is within the area shown on the map, a box appears on the map with the waypoint's number beneath it. If a symbol was assigned 47 to the waypoint, the symbol will show on the screen instead of the box. Navigate to a Waypoint To show navigation data to a waypoint location, first press the WAYPT/ROUTE key, then press the key next to the "Waypoints" label. Select the waypoint by pressing the up or down arrow keys until the desired waypoint is highlighted by the black box. The waypoint's position, distance from your present position, and bearing from your position to the waypoint show at the bottom of the screen. It draws a "S" with a box around it showing your position when you recalled the waypoint. (See the screen below. ) A dotted line extends from this box to the recalled waypoint. If you steer the boat along this line, you'll travel directly to the recalled waypoint. Navigation data also appears in all digital displays which show your course over ground (COG), speed over ground (SOG), distance to waypoint (DTG) and much more. Switch to the navigation or steering screens for more navigation information. Cancel Navigation To stop the GlobalMap 2000 from showing navigation data to a waypoint, first press the WAYPT/ROUTE key, then press the key next to the "Cancel Navigation" label. The unit returns to the last-used map, navigation, or steering screen. 48 Erase a Waypoint To delete a waypoint from the waypoint list, first press the WAYPT/ROUTE key, then press the key next to the "Waypoints" label. Now move the black box to the waypoint that you wish to erase using the arrow keys. A message appears on the screen that warns you that this waypoint will be permanently erased. WAYPOINT DISPLAY There are a number of options available when showing the waypoint location on the map. You can show all waypoints or turn them off, show only the symbols, names, or number, or any combination of these. To change the waypoint display, first press the MENU key, then press the key next to the "Mapping Setup" label. Press the key next to the desired option, then press the CLR key to exit this screen. The defaults for this screen are: all waypoints on, waypoint symbols on, waypoint names off, and waypoint numbers on. ROUTES A route gives you the ability to navigate to several waypoints without having to reprogram the unit after arriving at each one. When you travel on a route, the GlobalMap 2000 shows navigation information to the first waypoint in the route. When you reach the first waypoint, (signalled by the Arrival Alarm), the unit automatically 49 sequences to the next waypoint. [. . . ] This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Your remedies under this warranty will be available so long as you can show n a reasonable manner that the defect occurred within one (1) year fro the date of your original purchase, and we must receive your warranty claim no later than 30 days after such 1-year period expires. Your claim must be substantiated by a dated sales receipt or sales slip. 87 Lowrance's UPS Return Service Lowrance Electronics and United Parcel Service (UPS) are proud to offer all of our customers free shipping for all units sent to us for repair or service. If you have to send this unit to the factory, and you are in the continental United States, use the enclosed UPS shipping label for easy, free shipping to our factory customer service department. [. . . ]