User manual LOWRANCE GLOBALMAP 1600

[. . . ] LMS-160 and GlobalMap 1600 INSTALLATION AND OPERATION INSTRUCTIONS TM Copyright © 1998 Lowrance Electronics, Inc. GlobalMap 1600TM and LMS-160 are trademarks of Lowrance Electronics, Inc. A CAREFUL NAVIGATOR NEVER RELIES ON ONLY ONE METHOD TO OBTAIN POSITION INFORMATION. Never use this product while operating a vehicle. CAUTION When showing navigation data to a position (waypoint), this unit will show the shortest, most direct path to the waypoint. [. . . ] Use the arrow keys to name the route, (you can use up to eight characters in the name) then press the ENT key when you're finished. The gray boxes in the lower portion of the screen comprise the list of waypoints that form the route. To add waypoints to the route, highlight the first gray box and press the right arrow key. To add a waypoint to the route from the waypoint table, select the "ADD WPT" label. Add From Waypoint List This screen is virtually identical to the waypoint screen Select a waypoint either by using the waypoint number, waypoint name, or from the waypoint list. After selecting the waypoint, highlight the "ADD TO ROUTE" label and press the right arrow key. The unit returns to the route screen with the first waypoint at the top of the list. Highlight the next waypoint location beneath the first waypoint and press the right arrow key. Now repeat the previous steps to select the second waypoint for your route. After selecting the second waypoint, the unit returns to the waypoint list screen. The second waypoint shows beneath the first one, with bearing and dis44 tance from the first waypoint in the route to the second showing under the second waypoint's name. Add From Map You can add waypoints from the map, even create new ones. To do this, select "ADD FROM MAP" from the menu as shown on the previous page. Using the arrow keys, move the cursor to the desired waypoint or location. If you mark a location with the cursor that isn't a waypoint, the unit will create a waypoint and add it to the route. To add another location or waypoint to the route, move the cursor to that location and press the ENT key. Continue selecting waypoints until all of the waypoints in the route are on the list. Delete a Waypoint from the Route To remove a waypoint from a route, first select the route, then select the waypoint that you want to delete and press the right arrow key. Highlight the "Delete" label on this menu and press the right arrow key. The unit returns to the route list with the waypoint removed from the list. (Note: This doesn't delete the waypoint from the database, it simply removes it from the route. ) Waypoint Statistics By default, this unit shows the distance and bearing from each waypoint in the route to the next. It will also show estimated time en route (ETE), estimated time of arrival (ETA), or the waypoint names (NAMES). To view the different statistics, highlight the "SHOW INFO-DIS/BRG" label, then press the left or right arrow key until the desired statistic appears. 45 Follow a Route - Direct To Method Before starting the route, you'll need to decide if you want to start at the first waypoint and travel forward to the last waypoint or start at the last waypoint in the route and travel backwards (reverse) to the first waypoint. [. . . ] Your claim must be substantiated by a dated sales receipt or sales slip. 83 Notes: 84 How to Obtain Service (Canadian Customers Only) We back your investment in quality products with quick, expert service and genuine Lowrance replacement parts. If you need service or repairs, contact the Lowrance Factory Customer Service Department at the toll-free number listed below. A technician may be able to solve the problem and save you the inconvenience of returning your unit. You will be asked for your unit's serial number. 800-324-1356 Canada Only. [. . . ]