User manual LOWRANCE GLOBALMAP 100

[. . . ] GlobalMap 100 INSTALLATION AND OPERATION INSTRUCTIONS ® Copyright © 1996, 1997, 1998, 2000 Lowrance Electronics, Inc. GlobalMap® 100 and Lowrance® are registered trademarks of Lowrance Electronics, Inc. A CAREFUL NAVIGATOR NEVER RELIES ON ONLY ONE METHOD TO OBTAIN POSITION INFORMATION. Never use this product while operating a vehicle. CAUTION When showing navigation data to a position (waypoint), this unit will show the shortest, most direct path to the waypoint. [. . . ] Press the right arrow key to continue, or the left arrow key to exit without resetting the groups. WAYPOINTS This GPS receiver gives you the ability to create your own database of locations, called "waypoints'. You can save your present position, cursor position, or enter a coordinate and save it as a waypoint. For example, you may wish to store the location of your parked car as a waypoint before starting on a hike. When you want to return to the car, all you have to do is recall the waypoint and the unit will show distance and bearing from your present position to the car. Waypoint Menu With few exceptions, in order to save, modify, or recall a waypoint, you'll use the waypoint menu, shown at right. The waypoint's position, distance and bearing from your present position to the waypoint, and the date and time the waypoint was saved show at the bottom of the screen. In short, all of the detail about the waypoint shows on this screen. Saving Your Present Position as a Waypoint (Quick Save Method) To save your present position, simply press the WPT key twice. Your current position is placed into the first available waypoint number on the list. A message appears on the display telling you the waypoint number it just used. Anytime this menu is showing, simply press the WPT key once and the unit will store your present position on the waypoint list. In this case, waypoint number two was assigned when the position was saved. 29 Saving The Cursor Position as a Waypoint When the cursor is showing on the map and you press the WPT key twice, the cursor's position is placed into the first available waypoint number. In the example screen shown below, the cursor is placed at the desired location. Pressing the WPT twice causes waypoint number three to be placed at the cursor's crosshairs. (Waypoint 3 was the next available waypoint number. ) A message appears on the display telling you the waypoint number it just used. Press the EXIT key to erase the cursor. MOVE CURSOR TO DESIRED LOCATION PRESS WPT KEY TWICE Saving Your Present Position as a Waypoint (Select Number Method) The method shown previously doesn't let you choose the waypoint number. You can pick the waypoint number, then save your present or cursor position. (If you're saving the cursor position, first move the cursor to the desired location, then press the WPT key. ) A screen similar to the one at right appears. Press the right or left arrow keys until the desired waypoint number appears that you wish to save your present (or cursor) location under. Finally, highlight "CURRENT POS" and press the right arrow key. The unit returns to the waypoint screen with the position saved under the selected waypoint number. Note: you can save the position on any waypoint number, even if a position is already stored on the desired number. 30 Saving a New Position To save a position other than the cursor's or the present position as a waypoint, first select the waypoint number as described on the previous page. [. . . ] This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Your remedies under this warranty will be available so long as you can show in a reasonable manner that the defect occurred within one (1) year from the date of your original purchase, and we must receive your warranty claim no later than 30 days after such 1-year period expires. Your claim must be substantiated by a dated sales receipt or sales slip. 63 Notes: 64 How to Obtain Service (Canadian Customers Only) We back your investment in quality products with quick, expert service and genuine Lowrance replacement parts. If you need service or repairs, contact the Lowrance Factory Customer Service Department at the toll-free number listed below. [. . . ]