User manual LOWRANCE EP-90R PRESSURE SENSOR QUICK GUIDE

[. . . ] 988-0154-641 EP-90R Pressure Installation and Configuration Instructions This document shows how to install an EP-90R Pressure sensor and how to connect it to a NMEA 2000® network. It also provides instructions on how to configure your pressure sensor with Lowrance digital gauges (LMF-200 & LMF-400) and display units. NMEA 2000 is the communication bus standard developed by the National Marine Electronics Association (NMEA) for use in boats. Lowrance has introduced a line of products that can communicate over a NMEA 2000 network (LowranceNet). [. . . ] Use the ENTER and EXIT keys to manually scroll pages across the screen. You will use the Page Scrolling if you want pages to automatically scroll across the screen. Refer to your LMF-400 manual for more information about Page Scrolling. To add a page to the display: 1. A menu will pop up with four options: Add Page, Remove Page, Page Scrolling and Pop-Ups Setup. 2. Highlight Single Analog, Dual Analog, Quad Analog, Single Digital, Dual Digital, Quad Digital or Fuel Manager and press ENTER. The following message will appear: Press Enter to add the selected page. Press ENTER, which will take you back to the main display, where the page you selected will be shown on the screen. 17 Customizing Pages The customizing pages feature allows you to choose what data will be displayed on selected pages. You can use the Single Analog, Dual Analog, Quad Analog, Single Digital, Dual Digital, Quad Digital pages and Fuel Manager pages to display pressure sensor data. To customize Single Analog page: 1. Make sure the Single Analog page has been added to the page screen rotation. Use the ENTER and EXIT keys to scroll the Single Analog page onto the main display. Press MENU, use the UP and DOWN keys to select CUSTOMIZE and press ENTER. Select PITOT SPEED, ENG BST PRESS, ENG OIL PRESS, ENG WTR PRESS, FUEL PRESSURE, TRNS OIL PRESS or ATM PRESSURE and press ENTER. (If your unit is set to a single-engine configuration, or if you chose Pitot Speed or ATM Pressure, you will be taken back to the Bus Devices list. ) 5. Press EXIT repeatedly to return to the main display. To customize Dual Analog page: 1. Make sure the Dual Analog page has been added to the page screen rotation. Use the ENTER and EXIT keys to scroll the Dual Analog page onto the main display. Press MENU, use the UP and DOWN keys to select CUSTOMIZE and press ENTER. The Position menu will appear with two options: Top Gauge and Bottom Gauge. Highlight PITOT SPEED, ENG BST PRESS, ENG OIL PRESS, ENG WTR PRESS, FUEL PRESSURE, TRNS OIL PRESS or ATM PRESSURE and press ENTER. (If your unit is set to a single-engine configuration, or if you chose Pitot Speed or ATM Pressure, you will be taken back to the Position menu. ) 6. Repeat steps 4-6 to customize the other position or press EXIT repeatedly to return to the main display. [. . . ] WE MAKE NO OTHER EXPRESS WARRANTY OR REPRESENTATION OF ANY KIND WHATSOEVER CONCERNING THIS PRODUCT. Your remedies under this warranty will be available so long as you can show in a reasonable manner that any defect or malfunction in materials or workmanship, or any non-conformity with the product's written specifications, occurred within one year from the date of your original purchase, which must be substantiated by a dated sales receipt or sales slip. Any such defect, malfunction, or non-conformity which occurs within one year from your original purchase date will either be repaired without charge or be replaced with a new product identical or reasonably equivalent to this product, at our option, within a reasonable time after our receipt of the product. If such defect, malfunction, or non-conformity remains after a reasonable number of attempts to repair by us, you may elect to obtain without charge a replacement of the product or a refund for the product. [. . . ]