User manual LOWRANCE ELITE 5 SONAR

[. . . ] Installation & Operation Installation & Operation manual manual Elite 5 Sonar/GPS & Elite 5m GPS Copyright © 2009 Navico All rights reserved. Fishing Hot Spots® is a registered trademark of Fishing Hot Spots Inc. Points of Interest Data in this unit are by infoUSA, copyright© 2001-2008, All Rights Reserved. Navico may find it necessary to change or end our policies, regulations and special offers at any time. [. . . ] You can also select waypoint name, icon and latitude/ longitude from the new waypoint menu. Delete All deletes all waypoints. Routes screen Routes menu Sort Controls how the waypoints list will be sorted -- by name or by nearest. Routes Screen Used to create, edit, navigate and delete routes. Use the keypad to highlight the Routes tab to access the Routes screen. Creating a route Routes can be created by inserting waypoints from the waypoints list or by using the cursor to position new points on the chart. You can also add waypoints by selecting existing waypoints from the chart. 27 Chart Operation Shows selected route waypoint on the chart Inserts waypoint between existing route waypoints 4. Press MEnU and select Add to end to add another waypoint to the route. Remove waypoint Adds waypoint to end of the route 8. When the route is complete, highlight the Accept button on the New Route screen and press EnTER. Route waypoint menu Starts navigation to the selected route waypoint Controls how waypoints are listed To create a route from waypoint list: 1. Press the keypad down to select the route screen window and press MEnU. Add waypoints from list or Points from chart. 28 Chart Operation Creating a route using points from chart: 1. Repeat Steps 1-4 from the instructions for Creating a route from waypoint list. Select the desired route on the Route screen and press MEnU. Delete Delete all New Route screen Edit Route screen Routes menu Save to card Load from card 2. Edit and New Route menus Used to edit/create routes, route names and to turn on/off the route display. That allows you to display only desired routes on the map. Route name keyboard To access the Edit or New Route menu, select Edit or New on the Routes menu and press EnTER. To finalize changes on the Edit or New Route menus, highlight the Accept button and press EnTER. Displayed Used to show/hide a route on the display, which prevents the screen from being cluttered by too many routes Delete and Delete All Delete is used to delete individual routes. Delete All, removes all routes. Use keypad to select Route leg window Turns on/ off route display on map 30 Chart Operation Trails Screen Used to create, edit, navigate and delete trails. Use the keypad to highlight the Trails tab to access the Trails screen. Delete Delete All New Trail menu Edit Trail menu Routes screen Routes menu Load from card Trails menu Save to card Creating trails When creating a trail you can customize the trail name and color from the New Trail menu. To create a trail: 1. Use the keypad to highlight Record and press EnTER to make the trail active/inactive. Select Save and press EnTER. 31 Chart Operation Edit and New Trail menus Allows you to edit/create trails, select trails names, trail color, trail display and the trail being recorded. Highlight the Accept button and press EnTER. Turns on/ off trail display on map 4. For navigation instructions refer to the Navigating a route segment. Turns on/ off trail recording Displayed and Record Displayed allows you to show/hide trails on the map display, preventing the screen from being cluttered with trails. The Record command allows you to record or resume recording a desired trail. Edit Trails menu Navigating a trail A trail must be saved as a route before it can be navigated. 32 Chart Operation Create route (from trail) Used to convert a trail into a route, which allows you to navigate a selected trail. Overlay Data and Settings Overlay Data is covered in the Basic Operation section. Settings accesses the Settings menu, but will only be shown on the map when the unit is in Advanced mode. Orientation Allows you to select North Up or Course Over Ground (COG) as the map orientation. North Up COG 33 Settings Settings Menu System Adjusts unit settings like language, mute audio and advanced mode. Language menu Time menu Accesses to installation and configuration settings for your unit. System Settings Navigation Settings GPS Source menu Chart Settings Sonar Settings GPS status screen System menu Settings menu Alarms Simulator NMEA 0183 (Advanced mode only) Unit Settings (Advanced mode) Tmp/Spd port menu Restore defaults message Displays software information screen 34 Settings Set Language Selects the language used on menus and text boxes. [. . . ] IF YOU DO NOT ACCEPT ALL TERMS AND CONDITIONS, PROMPTLY RETURN THE PRODUCT WITHIN 30 DAYS OF PURCHASE. PLEASE RETURN USING THE ENCLOSED UPS SHIPPING LABEL AND INCLUDE: PROOF OF PURCHASE, NAME, ADDRESS, AND PHONE NUMBER. 1. 2. 3. This License Agreement applies to the one or more databases that your product may contain. We refer to these singly as a "Database" and together as the "Databases. " Your product may thus include the "WBS Database" which contains worldwide background surface mapping data, the "SmartMap Database" which contains inland mapping data, or other Databases. [. . . ]