User manual LOGITECH Z5400D SETP

[. . . ] Do not push objects into apparatus vents or slots because fire or electric shock hazards could result. Maintain a minimum distance of at least 6 inches around apparatus for sufficient ventilation. Ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table clothes, curtains, etc. No naked (open) flame sources, such as lighted candles, should be placed on or near the apparatus. [. . . ] Standby (Off): The power to the speakers is off, the LCD is blank, and the power LED is red. ⷠReady (On): The speakers are on and the power LED is blue. Pressing the standby button will put the system into standby (off) mode. While in the Ready state, the first line of the LCD displays the current source input. DTS® soundtracks are included in many DVD videos, DVD Audio discs and PlayStation®2 games. the Z-5400 Digital includes a hardware DTS® decoder for master quality sound. The Z-5400 Digital also includes support for DTS® 96/24 - an enhanced, higher-resolution, studio-quality format available on many DVD video and DVD Audio discs. Coax: input stream from the coax input Cycling through the inputs is always the same unless you have the 2-position switched to stereo 1-3 mode. Stereo 1: Use the Front L/R analog input (green) as a stereo input Stereo 2: Use the Rear L/R analog input (black) as a stereo input Stereo 3: Use the Center/Sub analog input (orange) as a stereo input Optical 1: input stream from the Optical 1 input Optical 2: input stream from the Optical 2 input Coax: input stream from the coax input The effect button is used to select the type of surround sound or audio technology you want to use with a particular input. In many cases, the control pod will recognize what audio technology is streaming from your audio device, and will automatically select it. For example, if you are watching a DVD and have selected the Dolby® Digital 5. 1 stream on the DVD, then when you select the DVD audio input, Dolby® Digital will automatically be the selected effect. The control pod will default to the last effect used by whatever input source you are using. You can use the `effect' button to select a different audio technology if you wish to change it. Note that not all effects are available for all inputs (refer to the table). repeatedly pressing the `effect' button rotates through the available options for that type of input. If only one effect option is available, then the effect button will have no impact. Whenever the input or bitstream changes, the previously selected effect will be automatically re-selected. direct input , `Stereo x2' will be stored in memory for the `Direct' Input. The next time you select the Direct input, Stereo x2 will be automatically selected as the effect. When returning from Standby, the previously selected input and effect will be shown on the control pod. For more information about surround sound and other digital audio technologies, visit www. [. . . ] Logitech AND ITS SUPPLIERS expressly disclaim all other warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose and noninfringement of third-party rights with respect to the HARDWARE. No Logitech dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event will Logitech or its suppliers be liable for any costs of procurement of substitute products or services, lost profits, loss of information or data, or any other special, indirect, consequential, or incidental damages arising in any way out of the sale of, use of, or inability to use any Logitech product or service, even if Logitech has been advised of the possibility of such damages. [. . . ]