User manual LOGITECH X-530

[. . . ] Do not use the speakers near water, and do not immerse them in any liquid or pour any liquid on them. Do not block the openings in the speaker cabinets, never push objects into speaker vents or slots because of fire or electric shock hazards, and provide sufficient space around the speakers for proper ventilation. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] The right front speaker is the control center for your system, so you will want to place it within easy reach. Place the rear left and right satellite speakers behind you and about the same distance apart as the front speakers. Position the front center channel speaker on top of your monitor or on your desk in between your monitor and keyboard. Depending on where you place your speakers, adjust the stand to direct the sound toward you. For best sound quality, place the subwoofer on the floor beneath your desk. Be sure to maintain at least 6 inches of spacing around the subwoofer to allow for adequate ventilation. Insert the colored plug from each satellite speaker into the corresponding colored jacks on the back of the subwoofer. Connect the d-sub plug from the front right speaker to the subwoofer as shown on the previous page. Carefully align the pins before inserting the plug, and screw down the connector. 1) sound card: Connect all 3 colored plugs from the audio input cable to the colorcoded jacks on the sound card. If jacks on your soundcard are not color coded, plug the audio input as follows: · Green to front L/R (or #1) · 4-channel sound card: Connect the green plug from the audio input cable to your sound card's front jack and the black plug to your sound card's rear jack. 2-channel sound card: Connect the green plug from the audio input cable to the "line out" jack on your sound card. With a 2-channel sound card you will not hear sound from the rear speakers. If you have a video game console (PlayStation®, PlayStation®2, XboxTM, or GameCube®): · Connect the green, black and orange plugs from the audio input cable to the 3 stereo mini jacks on the video game adapter. ⷠConnect the red and white RCA audio cables from your video game console to the RCA audio jacks to the video game adapter. Access these controls on the right front speaker: Power/Standby Toggles between power on and standby mode. [. . . ] Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. The above limitations will not apply in case of personal injury where and to the extent that applicable law requires such liability. [. . . ]