User manual LOGITECH HD WEBCAM C525

[. . . ] The copyright of this manual is reserved by Samsung Electronics, Co. , Ltd. The contents of this manual may not be partially or in whole reproduced, distributed or used in any form without the written permission of Samsung Electronics, Co. , Ltd. The LOGITECH logo and SyncMaster are the registered trademarks of Samsung Electronics, Co. , Ltd. Microsoft, Windows and Windows NT are the registered trademarks of Microsoft Corporation. [. . . ] Related Windows 7 driver can be downloaded from Samsung Electronics website. Complete the remaining installation steps according to the instructions displayed on the screen. Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings. For more information, refer to the document about the Windows operating system. Using the product 3-13 3-14 Product Operating Buttons Product Operating Buttons Touch them lightly with your fingers to use them. ICON DESCRIPTION Press this button to view the On Screen Display (OSD). This button is also used to exit the OSD or to return to a higher-level OSD menu * OSD Adjustment Lock This function locks the OSD in order to maintain the current settings or to prevent the settings from being changed by another person On: If you press and hold the MENU button down for 5 seconds, the OSD Adjustment Lock function is activated. Off: If you press and hold the MENU button down for 5 seconds again, the OSD Adjustment Lock function is disabled. Even if the OSD Adjustment Lock function is activated, users can adjust the brightness and contrast and can set up the adjustment function assigned to the [ ]. / Use these buttons to navigate the menu or to adjust a value in the OSD. If the user presses the Customized Key [ ] after setting it, the configured function will be performed · <MagicBright> - <MagicAngle> - <MagicEco> - <Image Size> You can set the function of the Customized Key by selecting <SETUP&RESET> -> <Customized Key> in the OSD. Use this button to control the brightness of the screen. 3-14 Using the product ICON SOURCE Use this button to select a function DESCRIPTION If you press the [SOURCE] button when there is no OSD, the input signal (Analog/Digital) is switched. Users can set suitable picture quality as needed. This menu is unavailable when <MagicBright> is set to <Dynamic Contrast> or <Cinema> mode. This menu is unavailable when <MagicColor> or <Color Effect> is set. Using the product 3-15 MENU Coarse DESCRIPTION Removes vertical noise lines (line pattern) from the screen. In this case, move the screen so that the screen is displayed at the center of the display panel using the <H-Position> menu. This function is only available in Analog mode. Fine Removes horizontal noise lines (line pattern) from the screen. If you cannot remove the noise completely with the <Fine> function, adjust the <Coarse> and then use the <Fine> function again. This function is only available in Analog mode. COLOR 3-15 Using the product MENU MagicColor DESCRIPTION Expresses natural colors more clearly without changing the picture quality using proprietary digital picture quality improvement technology developed by Samsung Electronics. · · · · <Off> - Turns the <MagicColor> function off. <Demo> - You can compare the pictures processed by <MagicColor> with the original pictures. <Full> - Provides a clearer picture including areas corresponding to skin color. <Intelligent> - Improves the chroma of pictures except for areas corresponding to skin color. This menu is unavailable when <Color Effect> is set. Red You can adjust the red color value of pictures according to your preference. [. . . ] Since the standard voltage may differ from country to country, please check the label on the back of the product. 15pin-to-15pin D-sub cable, Detachable DVI-D to DVI-D connector, Detachable Dimensions (WxHxD) / Weight (Simple stand) 523. 4 x 378. 4 x 66. 9 mm / 20. 6 x 14. 9 x 2. 6 inches (Without Stand) 523. 4 x 422. 8 x 197. 0 mm / 20. 6 x 16. 6 x 7. 8 inches / 4. 65 kg / 10. 25 Ibs (With Stand) Temperature : 50°F ~ 104°F (10°C ~ 40°C) Humidity :10 % ~ 80 %, non-condensing Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C) Humidity : 5 % ~ 95 %, non-condensing Tilt 0° (±1°)~20° (±1°) B2230W Environmental considerations Operating Class B (Information Communication equipment for residential use) This device has been registered regarding EMI for home use (Class B). (Class B equipment emits less electromagnetic waves than Class A equipment. ) 6-17 More Information 6-18 Power Saving Function This product provides a power saving function that automatically turns the screen off when the product is not used for a predetermined period of time to reduce power consumption. If the product enters power saving mode, the power LED turns to a different color to indicate that the product is in power saving mode. [. . . ]