User manual LOGITECH G9X LASER MOUSE

[. . . ] You can then use the G9x's dpi adjust buttons to change dpi on-the-fly to vary cursor speed in different situations. Lower dpi settings enable you to snipe with pinpoint accuracy, while higher dpi settings are great for situations where you need speed (e. SetPoint® software allows you to adjust your report rate (polling speed) in your mouse. Some like a mouse with more heft, something that feels substantial and easy to control. [. . . ] If you use your mouse on another PC or un-install SetPoint®, your mouse settings for those profiles will still work on your G9x. (Note: There are a few special settings that can only work while SetPoint® is running on your PC; in the case you choose a setting where this is true, SetPoint® will notify you. ) With SetPoint® running, you can also enable Application Detection if you choose. When Application Detection is running, the profiles in on-board memory are not necessarily active (unless you specify application-specific behavior for them). You will not be able to toggle between profiles using your mouse switching buttons. There will be a main profile on your mouse (Profile 1 shipped out-of-box) that will be enabled for all applications when Application Detection is running. You can then designate additional profiles in your Profile Library to run when your PC detects a specific application or game running. Your mouse will automatically employ the designated profile settings once it detects the corresponding application. In all other applications where a specific profile is not specified, the mouse will employ the main profile behavior. The G9x allows you to change the color of the LEDs to your preference using SetPoint® software. You can assign a different color to each profile so you can always tell which profile is enabled by the color of the LEDs. LED settings will always be indicated in ascending order from left to right. The lighting scheme will change depending on the number of dpi and profile settings you choose to have, but in all cases, the LEDs will light up to indicate lowest setting on the left to highest setting on the right. This LED display by default will indicate what dpi setting is active (DPI Mode). When the Profile button (bottom of the mouse) is being pressed (Profile Mode), the LEDs will indicate which profile setting stored in on-board memory is enabled. In this Profile Mode, the running man LED will blink to show you are able to actively change the profile setting. when the mouse is in DPI mode , pressing the + and ­ buttons will change dpi setting. When in Profile Mode, these same buttons will change the Profile setting. Note: When Application Detection is enabled in SetPoint®, the LEDs will only indicate dpi settings and not profile settings. Your G9x Laser Mouse offers the ultimate in customization to enhance your gaming experience. Every detail of this mouse was scrutinized and optimized for game play. By listening to gamers like you, we believe we've created a mouse for the most discriminating gamer. [. . . ] Logitech may, at its option, use new or refurbished or used parts in good working condition to repair or replace any hardware product. Any replacement hardware product will be warranted for the remainder of the original warranty period, or thirty (30) days, whichever is longer or for any additional period of time that may be applicable in your jurisdiction. Warranty This warranty does not cover problems or damage resulting from (1) accident, abuse, misapplication, or any unauthorized repair, modification or disassembly; (2) improper operation or maintenance, usage not in accordance with product instructions or connection to improper voltage supply; or (3) use of consumables, such as replacement batteries, not supplied by Logitech except where such restriction is prohibited by applicable law. Support Before submitting a warranty claim, we recommend you visit the support section at www. [. . . ]