User manual LOGITECH G9 LASER MOUSE

[. . . ] You can adjust the dpi resolution setting from 200 to 3200 dpi in increments of 200. Your preferred dpi settings can be determined in the Setpoint® software and saved to your G9's on-board memory for access without software. You can then use the G9's dpi adjust buttons to change dpi on-the-fly to vary cursor speed in different situations. Lower dpi settings enable you to snipe with pinpoint accuracy, while higher dpi settings are great for situations where you need speed (e. [. . . ] If you use your mouse on another PC or un-install Setpoint®, your mouse settings for those profiles will still work on your G9. (Note: There are a few special settings that can only work while Setpoint® is running on your PC; in the case you choose a setting where this is true, Setpoint® will notify you. ) With Setpoint® running, you can also enable Application Detection if you choose. When Application Detection is running, the profiles in on-board memory are not necessarily active (unless you specify application-specific behavior for them). You will not be able to toggle between profiles using your mouse switching buttons. There will be a main profile on your mouse (Profile 1 shipped out-of-box) that will be enabled for all applications when Application Detection is running. You can then designate additional profiles in your Profile Library to run when your PC detects a specific application or game running. Your mouse will automatically employ the designated profile settings once it detects the corresponding application. In all other applications where a specific profile is not specified, the mouse will employ the main profile behavior. The G9 allows you to change the color of the LEDs to your preference using Setpoint® software. You can assign a different color to each profile so you can always tell which profile is enabled by the color of the LEDs. Your G9 Laser Mouse offers the ultimate in customization to enhance your gaming experience. Every detail of this mouse was scrutinized and optimized for game play. By listening to gamers like you, we believe we've created a mouse for the most discriminating gamer. For more information on the G9's features and how they can help your game, visit www . LED settings will always be indicated in ascending order from left to right. The lighting scheme will change depending on the number of dpi and profile settings you choose to have, but in all cases, the LEDs will light up to indicate lowest setting on the left to highest setting on the right. This LED display by default will indicate what dpi setting is active (DPI Mode). When the Profile button (bottom of the mouse) is being pressed (Profile Mode), the LEDs will indicate which profile setting stored in on-board memory is enabled. In this Profile Mode, the running man LED will blink to show you are able to actively change the profile setting. when the mouse is in DPI mode , pressing the + and ­ buttons will change dpi setting. When in Profile Mode, these same buttons will change the Profile setting. [. . . ] Valid warranty claims are generally processed through the point of purchase during the first thirty (30) days after purchase; however, this period of time may vary depending on where you purchased your product. Please check with Logitech or the retailer where you purchased your product for details. Warranty claims that cannot be processed through the point of purchase and any other product related questions should be addressed directly to Logitech. The addresses and customer service contact information for Logitech can be found in the documentation accompanying your product and on the web at www. [. . . ]