User manual LOGITECH E2500

[. . . ] If prompted to allow Logitech Alert access to the network, you should always answer "Yes" or "Allow. " Legal Warning 13 Logitech AlertTM Video Security System 0i Logitech Alert 700i/75 ents TM System Requirem & Support Guide Quick-start guide GETTING TO KNOW Certain uses of security camera products and audio devices, such as employee monitoring, surreptitious viewing and recording of images and/or audio, or the use, publication or distribution of image and/or audio recordings, are prohibited or restricted by country, state and local laws. Be sure to comply with the laws in your country, state, and locality when using Logitech Alert products and services. Network Adapter / Power Supply Install Note Are you going to run Logitech WiLife & Logitech Alert Systems Simultaneously? Read special notes at www. logitech. com/security/legacy Do NOT plug the network adapter or power supply into a surge protector or power strip as they interfere with the cameras. [. . . ] Surge protectors are built-in to the network adapter and power supply and protect the cameras. The network adapter and power supply must be plugged directly into your wall outlet. Master System 1 Logitech Alert Camera 2 Software install CD 3 Power supply cable (yellow tips) 4 microSDTM card adapter 5 Desktop stand 6 Mounting accessories 7 Camera power supply 8 Network adapter 9 Network adapter cable (blue tips) 10 Suction cup 11 Power supply cable extender 12 System Requirements Guide 13 Getting to Know Guide 1 Install Software ! Internet access is required for installation. 2 Plug in Network Adapter When prompted to plug in the network adapter: 1) Plug one end of the blue cable connector into the network adapter. 2) Connect the other blue cable connector into an open port on your router. 3 Plug in Your Camera When prompted to connect your camera: 1) Remove the hatch from the back of the camera. 2a) Plug the power supply into an outlet near the PC where the software is installed. 1 1a 2 1) Insert the Software Install CD and follow the instructions during the install. · The installer will check for the latest version of the software. Alternatively, you can download the latest version at www. logitech. com/downloads. 4) The First Run Wizard will guide you through the next steps of setup. See F1 Help for instructions. * See Camera Reset Instructions for assistance. Using the microSDTM card adapter NOTE: Unplug the camera before removing, replacing, or upgrading your microSD card. To review the video on the microSD card, we recommend you using Logitech Alert Commander. To review the video on the microSD card without Logitech Alert Commander: 1) Open the hatch on the bottom of the camera and remove the microSD card from its port. 2) Plug the microSD card into the adapter. SMA RTM 1 2 3 3) Plug the adapter into the PC's SD card slot. · View video recordings using the free Apple QuickTime player or other player that supports H. 264 video playback. (To download QuickTime, visit http://www. apple. com/quicktime/download/) COM EDIA H I/II MMC/ MS/M PAC TF LAS SD S PRO www. logitech. com © 2010 Logitech. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. [. . . ] (To download QuickTime, visit http://www. apple. com/quicktime/download/) COM EDIA H I/II MMC/ MS/M PAC TF LAS SD S PRO www. logitech. com © 2010 Logitech. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. [. . . ]