User manual LOGILINK NS 0001 B ( 5-PORT SWITCH )

[. . . ] For one bay NS0045, please input \\NS0045 or http://NS0045/ ; for NS 0001 B ( 5-PORT SWITCH ), 2 bays, please input \\NS 0001 B ( 5-PORT SWITCH ) or http://NS 0001 B ( 5-PORT SWITCH ). Then, you will connect with the Devise and get into the setting place. If your Intranet environment doesn't support DHCP Service, please change your IP setting and input the default IP Address http://169. 254. 0. 253, then, you will connect with the Devise and get into the setting place 4. 3 Log in the Device 1. When Connect with your NAS, it shows below "Web Server Authentication". -6- 2. [. . . ] When Connect with your NAS, it shows below "Web Server Authentication". -6- 2. Please type the default username and password as below to Log in the Device. Log in successfully, you will get into the setting place. -7- 5. 0 Device Setting 5. 1 System menu: 5. 1. 1. Status When log in the device, you could see the current system setting status. Setup System: Rename the NAS Devise Name/ Group Name/Change the Password/Reboot NAS. System Information: Device Name: This will be your system Device name. Power Management: Click "Reboot" to have the device perform a software restart. The SYSTEM LED will blinks as the device restarts, when the LED is steady, the restart is complete. Log into the device again to access the web UI. Network: Network function setting (DHCP or Static IP) 1. Network Interface: · Link Speed: Internet link speed · Jumbo Frame: Selected Disable Jumbo Frames, MTU value is 1500, 4074, 7418, 9000 byte 2. When many people open the same in the same time, there is a mechanism to warm the other user that the file already be used by another user. Note: This mechanism only for Windows office files (Excel /word/Powerpoint. . . ) 4. Archive Option: Select "Enable", will create the recycle folder automatically. Public share quota: You could specify how many space of NAS you would like to share here. - 24 - Folder Manager: In default setting, there are PUBLIC, Media and Bit Torrent three folders. 1. Edit: Modify the selected folder's name and modify "Anonymous" or "Personal" access. Login: First select the folder you would like to share and then select the "Login". Write Access: You could define the user's access right here. Note: Access items shared from . You could define the user's access right here - 26 - 5. 2. 2. PASV mode port range: works by allowing FTP clients to initiate sending of both control and data messages. Anonymous Configuration: Define the Anonymous user's access right. Anonymous FTP Access: Read Only or Read / Write anonymous access. - 27 - Folder Manager: Define the folder for FTP. Media Server: Set-up of the communication protocol between the multimedia server and the NAS 1. [. . . ] PASV mode port range: works by allowing FTP clients to initiate sending of both control and data messages. Anonymous Configuration: Define the Anonymous user's access right. Anonymous FTP Access: Read Only or Read / Write anonymous access. - 27 - Folder Manager: Define the folder for FTP. Media Server: Set-up of the communication protocol between the multimedia server and the NAS 1. · · · UPnP: UPnP Setup: Allow change of UPnP related settings. [. . . ]